Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2011-06-26
Product name
HARDENER FOR ANTICORROSIVE EPOXY PRIMER 1 1
1.2.1 Relevant identified uses
Hardener for coatings. For
1.2.2. Uses advised against
All uses not specified in this section or in section 7.3
Icons in SDS
Company Information
company name
Spray Shop Supplies Pty Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
orders@sprayshopsupplies.com.au
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H312+H332, H315, H318, H335, H373
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
CLP Regulation (EC) nº 1272/2008: Classification of this product has been carried out in accordance with CLP Regulation (EC) nº 1272/2008. Acute Tox. 4: Acute toxicity, Category 4, H312+H332 Eye Dam. 1: Serious eye damage, Category 1, H318 Flam. Liq. 3: Flammable liquids, Category 3, H226 Skin Irrit. 2: Skin irritation, Category 2, H315 STOT RE 2: Specific target organ toxicity if swallowed, repeated exposure, Category 2, H373 STOT SE 3: Respiratory tract toxicity, single exposure, Category 3, H335
2.2 Label elements
CLP Regulation (EC) nº 1272/2008: Danger
Hazard statements
Acute Tox. 4: H312+H332 - Harmful in contact with skin or if inhaled Eye Dam. 1: H318 - Causes serious eye damage Flam. Liq. 3: H226 - Flammable liquid and vapour Skin Irrit. 2: H315 - Causes skin irritation STOT RE 2: H373 - May cause damage to organs through prolonged or repeated exposure (Oral) STOT SE 3: H335 - May cause respiratory irritation
Precautionary statements
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking P280: Wear protective gloves/protective clothing/eye protection/face protection P302+P352 IF ON SKIN Wash with plenty of water P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do Continue rinsing P403+P233: Store in a well-ventilated place. Keep container tightly closed P501: Dispose of contents and / or containers in accordance with regulations on hazardous waste or packaging and packaging waste respectively
Hazardous Ingredients
Xylene; Polyamidoamine adduct; 1-butanol
2.3 Other hazards
Product fails to meet PBT/vPvB criteria
