Note: Ingredients listed on restricted chemical lists
EC/CAS
231-153-3/7440-44-0
Name of the chemical
Carbon black
Concentration
20-50 10-30 10-20 2-10
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
2 - 10
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
2-10
General Information
Revision date
2020-08-14
Product name
BATTERY LI-ION P40 / P800 / IF / ST400i
1.2.1 Relevant identified uses
Rechargeable lithium ion batteries
Icons in SDS
Company Information
company name
SPIT PASLODE
e-mail address of the competent person responsible for the Safety Data Sheet
msds-reach@spit.com
Section 2
2.1 Classification of the substance or mixture
In compliance with EC regulation No. 1272/2008 and its amendments. This mixture does not present a physical hazard. Refer to the recommendations regarding the other products present on the site. This mixture does not present a health hazard with the exception of possible occupational exposure thresholds (see paragraphs 3 and 8). This mixture does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use.
2.2 Label elements
In compliance with EC regulation No. 1272/2008 and its amendments. No labelling requirements for this mixture.
2.3 Other hazards
The mixture does not contain substances classified as ‘Substances of Very High Concern' (SVHC) >= 0.1% published by the European CHemicals Agency (ECHA) under article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table The mixture fulfils neither the PBT nor the vPvB criteria for mixtures in accordance with annexe XIII of the REACH regulations EC 1907/2006. THE BATTERY IS AN ARTICLE CONTAINING AN INTEGRATED MIXTURE (electrolyte - REACH definition). THE ELECTROLYTE IS CONSUMED DURING THE ARTICLE'S USE PHASE AND IS NOT REJECTED (unless the article is damaged). THE ABOVE LABEL IS THEREFORE FOR INFORMATION PURPOSES in case the ARTICLE IS DAMAGED and should not be fixed to the article. The rechargeable lithium ion batteries described in this SDS are sealed products that are not hazardous when used in accordance with the manufacturer's instructions. Do not short circuit, pierce, incinerate, crush, submerge, forcefully discharge or expose to temperatures in excess of the operating range stated on the products. Risk of fire and explosion.