Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-44-0
Name of the chemical
Carbon black
Concentration
N/A
EC/CAS
931-328-0
Name of the chemical
Carbon black
Concentration
N/A
General Information
Revision date
2019-09-02
Product name
SCG-C
Product Synonyms
Activated Carbon
CAS No.
7440-44-0
1.2.1 Relevant identified uses
Use as an adsorbent in industrial, professional and consumer setting
Emergency telephone
Suzanne Warren T: +44 ())7970 633392
Icons in SDS
Company Information
company name
Spectrum (Company no. 01595206)
Section 2
2.1 Classification of the substance or mixture
In compliance with EC regulation No. 1272/2008 and its amendments. This substance does not present a physical hazard. Refer to the recommendations regarding the other products present on the site. This substance does not present a health hazard. This substance does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use. In compliance with directives 67/548/EEC, 1999/45/EC and their amendments. This substance does not present a physical hazard. Refer to the recommendations regarding the other products present on the site. This substance does not present a health hazard. This substance does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use.
2.2 Label elements
In compliance with EC regulation No. 1272/2008 and its amendments. No labelling requirements for this substance. In compliance with directives 67/548/EEC, 1999/45/EC and their amendments.
Precautionary statements
S 22 Do not breathe dust
2.3 Other hazards
May cause CO and CO2 emanations in the event of a fire. According to the ECHA Guidance on chemical safety assessment, Chapter R11, section R11.1.2.1: “The PBT and vPvB criteria of Annex XIII to the Regulation do not apply to inorganic substances”. As Activated Carbon - HDS type is to be considered as an inorganic substance, the PBT assessment is not applicable. Wet Activated Carbon depletes oxygen from air and, therefore, dangerously low levels of oxygen may be encountered. Whenever workers enter a vessel containing activated carbon, the oxygen content should be determined and work procedures for potentially low oxygen areas should be followed.
