General Information
Revision date
2015-06-09
Product name
Urethane Thinner
Product name
Urethane Thinner
Identification on the label/Trade name
MIL-T-81772 TYPE-I
1.2.1 Relevant identified uses
Professional Industrial and Commercial Spray Painting
Manufacturer Name
Spectrum Coatings Laboratories, Inc
Icons in SDS
Company Information
company name
Spectrum Coatings Laboratories, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
paintman97@gmail.com
GHS Information
Signal word
Danger Section 2 - Hazardous Ingredient Information
Section 2
SECTION 2: Hazards identification
Classifications
Flammable liquid Skin corrosive 2 Flash point < 23°C and initial boiling point > 35°C (95°F) 2 Reversible adverse effects in dermal tissue, Draize score: >= 2.3 < 4.0 or persistent inflammation Eye corrosive Carcinogen Reproductive toxin 2A Eye irritant: Subcategory 2A, Reversible in 21 days 2 Limited evidence of human or animal carcinogenicity 2 Human or animal evidence possibly with other information
Aspiration hazard
1 Aspiration Toxicity Category 1: Known (regarded)- human evidence - hydrocarbons with kinematic viscosity ? 20.5 mm2/s at 40° C.
Hazard statements
H225 Highly flammable liquid and vapour H304 May be fatal if swallowed and enters airways H315 Causes skin irritation H319 Causes serious eye irritation H351 Suspected of causing cancer H361 Suspected of damaging fertility or the unborn child
Precautionary statements
P201 Obtain special instructions before use P202 Do not handle until all safety precautions have been read and understood P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking P233 Keep container tightly closed P240 Ground/bond container and receiving equipment P241 Use explosion-proof electrical/ventilating/lighting/all motorized electrical equipment being used in the area where this material is being handled P242 Use only non-sparking tools P243 Take precautionary measures against static discharge P264 Wash all exposed areas thoroughly after handling P280 Wear protective gloves/protective clothing/eye protection/face protection P281 Use personal protective equipment as required P321 Specific treatment (see Section 4 and 11 of SDS) P331 Do NOT induce vomiting P362 Take off contaminated clothing and wash before reuse P301+P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician P302+P352 IF ON SKIN: Wash with soap and water P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing P308+P313 IF exposed or concerned: Get medical advice/attention P332+P313 If skin irritation occurs: Get medical advice/attention P337+P313 Get medical advice/attention P370+P378 In case of fire: Use CO2, Foam, or Chemical Extinguisher for extinction P405 Store locked up P403+P235 Store in a well ventilated place. Keep cool P501 Dispose of contents/container to suitable waste stream in accordance with local, regional, national, and international regulations.
Signal word
Danger Section 2 - Hazardous Ingredient Information Chemical Name CAS number Weight Concentration % Propylene Glycol Monomethyl Ether Acetate 108-65-6 40.00% - 50.00% 2-Butanone 78-93-3 20.00% - 30.00% Toluol 108-88-3 10.00% - 20.00% Butyl Acetate 123-86-4 10.00% - 20.00% Xylol 1330-20-7 5.00% - 10.00% Section 4 - Emergency First Aid Measures Inhalation: If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention.