Note: Ingredients listed on restricted chemical lists
EC/CAS
108-10-1
Name of the chemical
4-methylpentan-2-one; isobutyl methyl ketone (MIBK)
Concentration
10.00%-20.00%
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
10.00%-20.00% 10.00%-20.00%
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
5.00%-10.00%
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
5.00%-10.00% 1.00%-5.00%
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
1.00%-5.00%
General Information
Revision date
2015-06-09
Product name
Urethane Primer Surfacer
Product name
Urethane Primer Surfacer
Identification on the label/Trade name
P-Series Urethane Part A
1.2.1 Relevant identified uses
Professional Industrial and Commercial Spray Painting
Manufacturer Name
Spectrum Coatings Laboratories, Inc
Icons in SDS
Company Information
company name
Spectrum Coatings Laboratories, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
paintman97@gmail.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H316, H319, H361
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classifications
Flammable liquid Skin corrosive 2 Flash point < 23°C and initial boiling point > 35°C (95°F) 3 Reversible adverse effects in dermal tissue, Draize score: >= 1.5 < 2.3 Eye corrosive Reproductive toxin 2A Eye irritant: Subcategory 2A, Reversible in 21 days 2 Human or animal evidence possibly with other information
Hazard statements
H225 Highly flammable liquid and vapour H316 Causes mild skin irritation H319 Causes serious eye irritation H361 Suspected of damaging fertility or the unborn child
Precautionary statements
P201 Obtain special instructions before use P202 Do not handle until all safety precautions have been read and understood P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking P233 Keep container tightly closed P240 Ground/bond container and receiving equipment P241 Use explosion-proof electrical/ventilating/lighting/all motorized electrical equipment being used in the area where this material is being handled P242 Use only non-sparking tools P243 Take precautionary measures against static discharge P264 Wash all exposed areas thoroughly after handling P280 Wear protective gloves/protective clothing/eye protection/face protection P281 Use personal protective equipment as required P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing P308+P313 IF exposed or concerned: Get medical advice/attention P332+P313 If skin irritation occurs: Get medical advice/attention P337+P313 Get medical advice/attention P370+P378 In case of fire: Use CO2, Foam, or Chemical Extinguisher for extinction P405 Store locked up P403+P235 Store in a well ventilated place. Keep cool P501 Dispose of contents/container to suitable waste stream in accordance with local, regional, national, and international regulations.
Signal word
Danger
