General Information
Revision date
2015-09-06
Product name
Lusterless Alkyd Enamel
Product name
Lusterless Alkyd Enamel
Identification on the label/Trade name
TT-E-527C Enamel
1.2.1 Relevant identified uses
Professional Industrial and Commercial Spray Painting
Manufacturer Name
Spectrum Coatings Laboratories, Inc
Icons in SDS
Company Information
company name
Spectrum Coatings Laboratories, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
paintman97@gmail.com
GHS Information
Signal word
Danger Section 2 - Hazardous Ingredient Information ** PLEASE NOTE** Some Coatings may contain quantities of lead in excess of 0.03%
Section 2
SECTION 2: Hazards identification
Classifications
Flammable liquid Skin corrosive 2 Flash point < 23°C and initial boiling point > 35°C (95°F) 3 Reversible adverse effects in dermal tissue, Draize score: >= 1.5 < 2.3 Mutagen 1B Known to produce heritable mutations in human germ cellsSubcategory 1B, Positive results: In vivo heritable germ cell tests in mammals, Human germ cell tests, In vivo somatic mutagenicity tests, combined with some evidence of germ cell mutagenicity Carcinogen 1B Presumed Human Carcinogen, Based on demonstrated animal carcinogenicity Reproductive toxin 2 Human or animal evidence possibly with other information
Aspiration hazard
1 Aspiration Toxicity Category 1: Known (regarded)- human evidence - hydrocarbons with kinematic viscosity ? 20.5 mm2/s at 40° C.
Hazard statements
H225 Highly flammable liquid and vapour H304 May be fatal if swallowed and enters airways H316 Causes mild skin irritation H340 May cause genetic defects H350 May cause cancer H361 Suspected of damaging fertility or the unborn child
Precautionary statements
P201 Obtain special instructions before use P202 Do not handle until all safety precautions have been read and understood P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking P233 Keep container tightly closed P240 Ground/bond container and receiving equipment P241 Use explosion-proof electrical/ventilating/lighting/all motorized electrical equipment being used in the area where this material is being handled P242 Use only non-sparking tools P243 Take precautionary measures against static discharge P280 Wear protective gloves/protective clothing/eye protection/face protection P281 Use personal protective equipment as required P331 Do NOT induce vomiting P301+P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower P308+P313 IF exposed or concerned: Get medical advice/attention P332+P313 If skin irritation occurs: Get medical advice/attention P370+P378 In case of fire: Use CO2, Foam, or Chemical Extinguisher for extinction P405 Store locked up P403+P235 Store in a well ventilated place. Keep cool P501 Dispose of contents/container to suitable waste stream in accordance with local, regional, national, and international regulations.
Signal word
Danger Section 2 - Hazardous Ingredient Information ** PLEASE NOTE** Some Coatings may contain quantities of lead in excess of 0.03% Chemical Name CAS number Weight Concentration % Stoddard Solvent 8052-41-3 30.00% - 40.00% Calcium Magnesium Silicate Hydrate 14807-96-6 20.00% - 30.00% Trade Secret N/A 20.00% - 30.00% Aliphatice Petroleum Distillate 64742-89-8 5.00% - 10.00% Xylol 1330-20-7 1.00% - 5.00% Toluol 108-88-3 1.00% - 5.00% Non-Hazardous Coloring Pigment Pigment 1.00% - 5.00% Section 4 - Emergency First Aid Measures Inhalation: If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention.