Lead & Chromate Free High Solids Epoxy Primer

SECTION 2: Hazards identification

Classifications

Flammable liquid 2 Flash point < 23°C and initial boiling point > 35°C (95°F) Dermal Toxicity Acute Tox. 4 Dermal>1000+<=2000mg/kg Skin corrosive 2 Reversible adverse effects in dermal tissue, Draize score: >= 2.3 < 4.0 or persistent inflammation Eye corrosive 2A Eye irritant: Subcategory 2A, Reversible in 21 days Skin sensitizer 1 Skin sensitizer Carcinogen 2 Limited evidence of human or animal carcinogenicity

Hazard statements

H225 Highly flammable liquid and vapour H312 Harmful in contact with skin H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H351 Suspected of causing cancer

Precautionary statements

P201 Obtain special instructions before use P202 Do not handle until all safety precautions have been read and understood P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking P233 Keep container tightly closed P240 Ground/bond container and receiving equipment P241 Use explosion-proof electrical/ventilating/lighting/all motorized electrical equipment being used in the area where this material is being handled P242 Use only non-sparking tools P243 Take precautionary measures against static discharge P261 Avoid breathing dust/fume/gas/mist/vapours/spray P264 Wash all exposed areas thoroughly after handling P272 Contaminated work clothing should not be allowed out of the workplace P280 Wear protective gloves/protective clothing/eye protection/face protection P281 Use personal protective equipment as required P312 Call a POISON CENTER or doctor/physician if you feel unwell P321 Specific treatment (see Section 4 and 11 of SDS) P322 Specific measures (see … on this label) P362 Take off contaminated clothing and wash before reuse P363 Wash contaminated clothing before reuse P302+P352 IF ON SKIN: Wash with soap and water P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing P308+P313 IF exposed or concerned: Get medical advice/attention P332+P313 If skin irritation occurs: Get medical advice/attention P333+P313 If skin irritation or a rash occurs: Get medical advice/attention P337+P313 Get medical advice/attention P370+P378 In case of fire: Use CO2, Foam, or Chemical Extinguisher for extinction P405 Store locked up P403+P235 Store in a well ventilated place. Keep cool P501 Dispose of contents/container to suitable waste stream in accordance with local, regional, national, and international regulations.

Signal word

Danger

Hazardous Ingredients

Information Chemical Name CAS number Weight Concentration % Bisphenol-A, Epichlorohydrin 25036-25-3 10.00% - 20.00% Bisphenol-A Epichlorohydrin 25068-38-6 10.00% - 20.00% Calcium Silicate 10101-39-0 10.00% - 20.00% Proprietary Orthophosphate Silicate Hydrate Anti-Corrosive Pigment 5.00% - 10.00% Titanium Dioxide 13463-67-7 5.00% - 10.00% 1-chloro-4-(trifluoromethyl)-benzene 98-56-6 5.00% - 10.00% Ceramic Microspheres 66402-68-4 5.00% - 10.00% Barium Sulfate 7727-43-7 5.00% - 10.00% 2-Butanone 78-93-3 1.00% - 5.00% t-Butyl Acetate 540-88-5 1.00% - 5.00% 2-Heptanone 110-43-0 1.00% - 5.00% Calcium Magnesium Silicate Hydrate 14807-96-6 1.00% - 5.00% 1-Methoxy-2-Propanol 107-98-2 1.00% - 5.00% Normal Butyl Alcohol 71-36-3 1.00% - 5.00% Non-Hazardous Resis Solids Resin 1.00% - 5.00% Xylol 1330-20-7 1.00% - 5.00% Section 4 - Emergency First Aid Measures Inhalation: If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention.