General Information
Revision date
2015-06-08
Product name
Flat Gray Epoxy Part A
Product name
Flat Gray Epoxy Part A
Identification on the label/Trade name
MIL-C-22750D IAW FS-595-36231
1.2.1 Relevant identified uses
Professional Industrial and Commercial Spray Painting
Manufacturer Name
Spectrum Coatings Laboratories, Inc
Icons in SDS
Company Information
company name
Spectrum Coatings Laboratories, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
paintman97@gmail.com
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
Classifications
Flammable liquid 2 Flash point < 23°C and initial boiling point > 35°C (95°F) Skin corrosive 3 Reversible adverse effects in dermal tissue, Draize score: >= 1.5 < 2.3 Eye corrosive 2A Eye irritant: Subcategory 2A, Reversible in 21 days Skin sensitizer 1 Skin sensitizer Mutagen 1B Known to produce heritable mutations in human germ cellsSubcategory 1B, Positive results: In vivo heritable germ cell tests in mammals, Human germ cell tests, In vivo somatic mutagenicity tests, combined with some evidence of germ cell mutagenicity Carcinogen 1B Presumed Human Carcinogen, Based on demonstrated animal carcinogenicity Reproductive toxin 2 Human or animal evidence possibly with other information
Hazard statements
H225 Highly flammable liquid and vapour H316 Causes mild skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H340 May cause genetic defects H350 May cause cancer H361 Suspected of damaging fertility or the unborn child
Precautionary statements
P201 Obtain special instructions before use P202 Do not handle until all safety precautions have been read and understood P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking P233 Keep container tightly closed P240 Ground/bond container and receiving equipment P241 Use explosion-proof electrical/ventilating/lighting/all motorized electrical equipment being used in the area where this material is being handled P242 Use only non-sparking tools P243 Take precautionary measures against static discharge P261 Avoid breathing dust/fume/gas/mist/vapours/spray P264 Wash all exposed areas thoroughly after handling P272 Contaminated work clothing should not be allowed out of the workplace P280 Wear protective gloves/protective clothing/eye protection/face protection P281 Use personal protective equipment as required P321 Specific treatment (see Section 4 and 11 of SDS) P363 Wash contaminated clothing before reuse P302+P352 IF ON SKIN: Wash with soap and water P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing P308+P313 IF exposed or concerned: Get medical advice/attention P332+P313 If skin irritation occurs: Get medical advice/attention P333+P313 If skin irritation or a rash occurs: Get medical advice/attention P337+P313 Get medical advice/attention P370+P378 In case of fire: Use CO2, Foam, or Chemical Extinguisher for extinction P405 Store locked up P403+P235 Store in a well ventilated place. Keep cool P501 Dispose of contents/container to suitable waste stream in accordance with local, regional, national, and international regulations.
Signal word
Danger
Hazardous Ingredients
Information ** PLEASE NOTE** Some Coatings may contain quantities of lead in excess of 0.03%. Chemical Name CAS number Weight Concentration % Bisphenol-A, Epichlorohydrin 25036-25-3 20.00% - 30.00% Calcium Magnesium Silicate Hydrate 14807-96-6 20.00% - 30.00% Titanium Dioxide 13463-67-7 10.00% - 20.00% 2-Butanone 78-93-3 5.00% - 10.00% Propylene Glycol Monomethyl Ether Acetate 108-65-6 1.00% - 5.00% Amorphous Precipitated Silica 112926-00-8 1.00% - 5.00% Butyl Acetate 123-86-4 1.00% - 5.00% Toluol 108-88-3 1.00% - 5.00% Normal Butyl Alcohol 71-36-3 1.00% - 5.00% Aliphatice Petroleum Distillate 64742-89-8 1.00% - 5.00% Xylol 1330-20-7 1.00% - 5.00% Zinc Oxide 1314-13-2 1.00% - 5.00% Section 4 - Emergency First Aid Measures Inhalation: If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention.