A-Series Urethanes Part A

Spectrum Coatings Laboratories, Inc

Revision date : 2015-06-09

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS02 GHS08
Health risk rating 1
Safety risk rating 1
Environmental risk rating 1

General Information

Revision date

2015-06-09

Product name

A-Series Urethanes Part A

Product name

A-Series Urethanes Part A

Identification on the label/Trade name

Pigmented Acrylic Polyurethanes Part A

1.2.1 Relevant identified uses

Professional Industrial and Commercial Spray Painting

Manufacturer Name

Spectrum Coatings Laboratories, Inc

Icons in SDS

GHS02 GHS07 GHS08

Company Information

company name

Spectrum Coatings Laboratories, Inc

e-mail address of the competent person responsible for the Safety Data Sheet

paintman97@gmail.com

GHS Information

Signal word

Warning Section 2 - Hazardous Ingredient Information ** PLEASE NOTE** Some Coatings may contain quantities of lead in excess of 0.03%

Section 2

SECTION 2: Hazards identification

Classifications

Flammable liquid Skin corrosive 3 Flash point >= 23°C and <= 60°C (140°F) 3 Reversible adverse effects in dermal tissue, Draize score: >= 1.5 < 2.3 Carcinogen 2 Limited evidence of human or animal carcinogenicity

Hazard statements

H226 Flammable liquid and vapour H316 Causes mild skin irritation H351 Suspected of causing cancer

Precautionary statements

P201 Obtain special instructions before use P202 Do not handle until all safety precautions have been read and understood P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking P233 Keep container tightly closed P240 Ground/bond container and receiving equipment P241 Use explosion-proof electrical/ventilating/lighting/all motorized electrical equipment being used in the area where this material is being handled P242 Use only non-sparking tools P243 Take precautionary measures against static discharge P280 Wear protective gloves/protective clothing/eye protection/face protection P281 Use personal protective equipment as required P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower P308+P313 IF exposed or concerned: Get medical advice/attention P332+P313 If skin irritation occurs: Get medical advice/attention P370+P378 In case of fire: Use CO2, Foam, or Chemical Extinguisher for extinction P405 Store locked up P403+P235 Store in a well ventilated place. Keep cool P501 Dispose of contents/container to suitable waste stream in accordance with local, regional, national, and international regulations.

Signal word

Warning Section 2 - Hazardous Ingredient Information ** PLEASE NOTE** Some Coatings may contain quantities of lead in excess of 0.03% Chemical Name CAS number Weight Concentration % Trade Secret Butyl Acetate N/A 40.00% - 50.00% 123-86-4 10.00% - 20.00% Non-Hazardous Coloring Pigment Pigment 10.00% - 20.00% Xylol 1330-20-7 5.00% - 10.00% Propylene Glycol Monomethyl Ether Acetate 108-65-6 1.00% - 5.00% Section 4 - Emergency First Aid Measures Inhalation: If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.