PICRIC ACID, CRYSTAL, REAGENT

2.1 Classification of the substance or mixture

Acute toxicity - Oral Category 3 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin sensitization Category 1 Specific target organ toxicity (single exposure) Category 3 Flammable solids Category 2

2.3 Other hazards

Not applicable

2.2 Label elements

Danger

Hazard statements

Toxic if swallowed Causes skin irritation Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation Flammable solid Appearance Wetted solid Physical state Solid Odor Odorless

Prevention

Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Avoid breathing dust/fume/gas/mist/vapors/spray Contaminated work clothing must not be allowed out of the workplace Use only outdoors or in a well-ventilated area Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking Ground/bond container and receiving equipment Use explosion-proof electrical/ ventilating / lighting/ .? / equipment Wear protective gloves/eye protection/face protection

Response

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice/attention IF ON SKIN: Wash with plenty of water and soap Take off contaminated clothing and wash it before reuse If skin irritation or rash occurs: Get medical advice/attention IF INHALED: Remove person to fresh air and keep comfortable for breathing Call a POISON CENTER or doctor if you feel unwell IF SWALLOWED: Immediately call a POISON CENTER or doctor Rinse mouth In case of fire: Use CO2, dry chemical, or foam to extinguish

Storage

Store locked up. Store in a well-ventilated place. Keep container tightly closed

Precautionary statements

Disposal Dispose of contents/container to an approved waste disposal plant

Further information

Can explode on contact if water content is below 10%. Do not allow this material to dry out. May form shock-sensitive mixtures on contact with metals. Can violently decompose at elevated temperatures.