Nimonic, Nimoloy, Nickel Depolarized and Duravanic Nickel, Electroformed

Hazard statements (CLP)

H317, H334, H335, H350, H361d, H372, H373

Code

Statements

H317

May cause an allergic skin reaction

SECTION 2: Hazards identification

OSHA HCS 2012 EU/EEC

2.2 Label elements

DANGER CLP

Hazard statements

H317 - May cause an allergic skin reaction H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled H335 - May cause respiratory irritation H350 - May cause cancer. H361d - Suspected of damaging the unborn child. H372 - Causes damage to organs through prolonged or repeated exposure. H373 - May cause damage to organs through prolonged or repeated exposure. R22 - Harmful if swallowed R37 - Irritating to respiratory system. R42/43 - May cause sensitisation by inhalation and skin contact. R48/23 - Toxic: danger of serious damage to health by prolonged exposure through inhalation. R49 - May cause cancer by inhalation. R63 - Possible risk of harm to the unborn child. May cause an allergic skin reaction Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause respiratory irritation May cause cancer. Suspected of damaging fertility or the unborn child. Causes damage to organs through prolonged or repeated exposure. Precautionary

Prevention

P201 - Obtain special instructions before use P202 - Do not handle until all safety precautions have been read and understood. P260 - Do not breathe dust. P264 - Wash thoroughly after handling. P270 - Do not eat, drink or smoke when using this product. P271 - Use only outdoors or in a well-ventilated area. P281 - Use personal protective equipment as required. P285 - In case of inadequate ventilation wear respiratory protection. Obtain special instructions before use Do not handle until all safety precautions have been read and understood. Do not breathe dust. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves, clothing , and eye/face protection , . In case of inadequate ventilation wear respiratory protection.

Response

P304+P341 - IF INHALED If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P342+P311 - If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P321 - Specific treatment, see supplemental first aid information. P363 - Wash contaminated clothing before reuse. P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P308+P313 - IF exposed or concerned: Get medical advice/attention. Storage/Disposal • P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P501 - Dispose of content and/or container in accordance with local, regional, national, and/or international regulations. DSD/DPD IF INHALED If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. If on skin: Wash with plenty of water . Wash contaminated clothing before reuse. Specific treatment, see supplemental first aid information. If skin irritation or rash occurs: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF exposed or concerned: Get medical advice/attention. Storage/Disposal • Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of content and/or container in accordance with local, regional, national, and/or international regulations.

Precautionary statements

S37 - Wear suitable gloves S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S53 - Avoid exposure - obtain special instructions before use.

2.3 Other hazards

CLP • Heating above the melting point releases metallic oxides which may cause metal fume fever by inhalation. The symptoms are shivering, fever, malaise and muscular pain.

Health hazards

Metal Fume Fever

2.1 Classification of the substance or mixture

exposure to the hazardous fume or dust emissions generated remelting, grinding, cutting or welding. Skin Sensitization 1 - H317 Respiratory Sensitization 1 - H334 Specific Target Organ Toxicity Single Exposure 3: Respiratory Tract Irritation - H335 Carcinogenicity 1B - H350 Reproductive Toxicity 2 - H361d Specific Target Organ Toxicity Repeated Exposure 1 - H372 Specific Target Organ Toxicity Repeated Exposure 2 - H373 DSD/DPD • As shipped, these complex alloys in massive form have no known toxicological properties other than causing allergic reactions in individuals sensitive to the metals contained in the alloys. Hazardous fume or dust emissions may be released during remelting, grinding, cutting or welding. The classifications below are related to exposure to the hazardous fume or dust emissions generated remelting, grinding, cutting or welding. Toxic (T) Irritant (Xi) Harmful (Xn) Carcinogenic Substances - Category 2 Substances Toxic To Reproduction - Category 3 R22, R37, R42/43, R48/23, R49, R63 2.2 Label Elements DANGER CLP Hazard statements • H317 - May cause an allergic skin reaction