Omega 612

Sovereign Lubricants (UK) Ltd

Revision date : 2023-05-08

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07
Health risk rating 2
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

265-157-1/64742-54-7

Name of the chemical

Distillates (petroleum), hydrotreated heavy paraffinic

Concentration

98-99

General Information

Revision date

2023-05-08

Product name

Omega 612

supplier name

EU importer

Manufacturer Name

ITW PP & F Korea Limited

Icons in SDS

GHS07 M004 M009 M010 M011 M013 M017 M022

Company Information

company name

Sovereign Lubricants (UK) Ltd

e-mail address of the competent person responsible for the Safety Data Sheet

enquiries@sovereign-omega.co.uk

GHS Information

Signal word

Warning

Hazard Codes

Hazard statements (CLP)

H315

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

CLP: The product is classified: Skin Irrit. 2;H315 2.2. Label elements Warning H315 Causes skin irritation. P264 Wash hands thoroughly after handling. P280 Wear protective gloves. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P332 + P313 If skin irritation occurs: Get medical advice/attention. P362 + P364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents/container in accordance with local regulations. 2.3. Other hazards PBT/vPvB: This product does not contain any PBT or vPvB substances. Other: Degreasing to skin. Prolonged or repeated contact with skin may cause redness, itching, irritation, eczema, skin cracking and oil acne. The harmful effects may increase in used oil. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.2. Mixtures The product contains: mineral oil and additives. All substances in the product are either registered or exempt from registration under REACH. Only classified substances above threshold limits or substances with an exposure limit are shown. CLP: %: CAS-No.: EC No.: REACH Reg. No: Chemical name: Hazard classification: Notes: 98-99 64742-54-7 265-157-1 - Distillates (petroleum), Skin Irrit. 2;H315 L hydrotreated heavy Notes: L: DMSO < 3% (IP 346) References: The full text for all hazard statements is displayed in section 16. SECTION 4: FIRST AID MEASURES 4.1. Description of first aid measures Inhalation: Move into fresh air and keep at rest. In case of persistent throat irritation or coughing or after inhalation of oil mist: Seek medical attention and bring along these instructions. Skin contact: Remove contaminated clothing immediately and wash skin with soap and water. In case of rashes, wounds or other skin disorders: Seek medical attention and bring along these instructions. Eye contact: Immediately flush with plenty of water for at least 15 minutes. Remove any contact lenses and open eyelids widely. If irritation persists: Seek medical attention and bring along these instructions. Ingestion: Immediately rinse mouth and drink 1-2 glasses of water. Keep person under observation. If uncomfortable: Transportation to hospital. Bring along these instructions. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/effects: See section 11 for more detailed information on health effects and symptoms. 4.3. Indication of any immediate medical attention and special treatment needed Medical attention/treatments: Treat symptomatically. SECTION 5: FIREFIGHTING MEASURES 5.1. Extinguishing media Extinguishing media: Small fires: Extinguish with carbon dioxide or dry powder. Larger fires: Extinguish with foam, carbon dioxide or dry powder. Do not use water jet as an extinguisher, as this will spread the fire. 5.2. Special hazards arising from the substance or mixture Specific hazards: During fire, gases hazardous to health may be formed. 5.3. Advice for firefighters Protective equipment for fire- Selection of respiratory protection for fire fighting: follow the general fire fighters: precautions indicated in the workplace. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions: Avoid inhalation of oil mist and contact with skin and eyes. Follow precautions for safe handling described in this safety data sheet. 6.2. Environmental precautions Environmental Do not discharge into drains, water courses or onto the ground. precautions: 6.3. Methods and material for containment and cleaning up Methods for cleaning up: Absorb spillage with oil-absorbing material. Clean contaminated area with oil- removing material. 6.4. Reference to other sections References: For personal protection, see section 8. For waste disposal, see section 13. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for safe handling Safe handling advice: Observe good chemical hygiene practices. Avoid prolonged and repeated contact with oil, particularly used oil. Always remove oil with soap and water or skin cleaning agent, never use organic solvents. Do not use oil-contaminated clothing or shoes, and do not put rags moistened with oil into pockets. Technical measures: Use work methods which minimise oil mist production. Technical precautions: When working with heated oil, mechanical ventilation may be required. 7.2. Conditions for safe storage, including any incompatibilities Technical measures for safe No special precautions. storage: Storage conditions: Store in tightly closed original container in a dry, cool and well-ventilated place. Protect against direct sunlight. 7.3. Specific end use(s) Specific use(s): Not relevant. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control parameters No occupational exposure limit assigned. 8.2. Exposure controls Engineering measures: Provide adequate ventilation and minimise the risk of inhalation of vapours and oil mist. Provide access to washing facilities incl. soap, skin cleanser and fatty cream. Personal protection: Personal protection equipment should be chosen according to the CEN standards and in discussion with the supplier of the personal protective equipment. Respiratory equipment: In case of inadequate ventilation or risk of inhalation of oil mist, suitable respiratory equipment with combination filter (type A2/P3) can be used. Hand protection: Wear protective gloves. Nitrile gloves are recommended. Thickness: > 0,3 mm; Breakthrough time: > 240 min. The most suitable glove must be chosen in consultation with the gloves supplier, who can inform about the breakthrough time of the glove material. Eye protection: Risk of contact: Wear goggles/face shield. Skin protection: Wear apron or protective clothing in case of splashes. Hygiene measures: Wash hands after contact. Wash contaminated clothing before reuse. Environmental Exposure Not available. Controls: SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on basic physical and chemical properties Physical state: Liquid. Colour: Transparent brown. Odour: Mild / almost odourless.

2.2 Label elements

Warning H315 Causes skin irritation. P264 Wash hands thoroughly after handling. P280 Wear protective gloves. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P332 + P313 If skin irritation occurs: Get medical advice/attention. P362 + P364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents/container in accordance with local regulations.

Other hazards

PBT/vPvB This product does not contain any PBT or vPvB substances. Other Degreasing to skin. Prolonged or repeated contact with skin may cause redness, itching, irritation, eczema, skin cracking and oil acne. The harmful effects may increase in used oil.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.