Note: Ingredients listed on restricted chemical lists
EC/CAS
7722-84-1
Name of the chemical
Hydrogen peroxide
Concentration
N/A
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
General Information
Revision date
2017-01-09
Product name
SSI Mold Remover
supplier name
Solvent Systems International
Icons in SDS
Company Information
company name
Solvent Systems International
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H272, H290, H302, H314, H318, H332, H335
Hazard statements
Code
Statements
H272
May intensify fire; oxidiser
Section 2
2.1 Classification of the substance or mixture
Acute Toxicity-Oral Category 4 Acute Toxicity-Inhalation Category 4 Skin Corrosion/Irritation Category 1A Serious Eye Damage/Eye Irritation Category 1 STOT-Single Exposure Category 3
Physical hazards
Oxidizing Liquids Category 2 Corrosive to metals Category 1 Danger
Hazard statements
H272 – May intensify fire; oxidizer. H290 – May be corrosive to metals H302 – Harmful if swallowed. H332 – Harmful if inhaled. H314 – Causes severe skin burns and eye damage. H318 – Causes serious eye damage. H335 – May cause respiratory irritation.
Prevention
P234 -- Keep only in original container. P264 -- Wash exposed skin thoroughly after handling. P270 -- Do not eat, drink or smoke when using this product. P271 -- Use only outdoors or in a well-ventilated area. P273 -- Avoid release to the environment. P210 -- Keep away from heat/sparks/open flames/hot surfaces. No smoking. P220 -- Keep/store away from combustible materials. P221 -- Take any precaution to avoid mixing with combustibles. P260 -- Do not breathe dust/fume/gas/mist/vapours/spray. P280 -- Wear protective gloves/protective clothing/eye protection/face protection.
Response
P310 -- Immediately call a POISON CENTER or doctor/physician. P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contactlenses, if present and easy to do. Continue rinsing. P303 + P361 + P353 IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P363 -- Wash contaminated clothing before reuse. P370 + P378 In case of fire: Use dry chemical, alcohol resistant foam or dry sand for extinction. P390 -- Absorb spillage to prevent material damage. P391 -- Collect spillage.
Storage
P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 -- Store locked up. P406 -- Store in corrosive resistant container with a resistant inner liner.
Disposal
P501 -- Dispose of contents/container in accordance with local / regional / national /international regulations.
