RADEL(R) R-5800 RD4D128 9X02695HRD4D1 28 Made of RADEL (R)*

solvay

Revision date : 2007-09-13

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating
Safety risk rating
Environmental risk rating

General Information

Revision date

2007-09-13

Product name

RADEL(R) R-5800 RD4D128 9X02695HRD4D1 28 Made of RADEL (R)*

CAS No.

25608-64-4

Icons in SDS

Company Information

company name

solvay

Section 2

SECTION 2: Hazards identification

EMERGENCY OVERVIEW Pellets may give off an odor. Spilled material may present a slip hazard. Pellet material can burn in a fire creating dense smoke. Molten plastic can cause severe thermal burns. Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. If recommended processing and manufacturing guidelines are followed, this product should not pose a hazard to the users. Howevegz, secondary operations such as grinding, sanding, or cutting may create dust which can present an explosion or respiratory hazard.

Potential health effects

Toxicity information is not available for this composite. Health hazard assessment is based on information for the component raw materials used to manufacture this product. SABIC _& ybias R-5800 RD4D128 Page 2 EYES Product may cause irritation due to mechanical action. SKIN CONTACT: Pellet material is not likely to cause irritation. Secondary operations such as grinding, sanding, or cutting may release dust particles which can irritate the skin. SKIN ABSORPTION: Not likely to occur due to nature of the product. INGESTION: Not acutely toxic. INHALATION: Pellets are not considered to be an inhalation hazard. Processing this compound may release the following by-products which may irritate the respiratory system: Titanium dioxide Zine compounds MELT PROCESSING HEALTH EFFECTS: - Contact with molten plastic can cause severe burns. - Processing fumes may cause irritation to the eyes, skin, and respiratory tract. ~ In cases of severe exposure, nausea and headaches may develop. FIRST AID MEASURES EYES: If contact with the eyes occurs, immediately remove any contact lenses and flush with copious quantities of water for a minimum of 15 minutes. Consult a physician for medical treatment. SKIN: Wash material off skin with soap and water. If redness, itching or burning sensation develops consult a physician for medical treatment. SABIC S&S jhias R-5800 RD4D128 Page 3 INGESTION: Not probable due to nature of the product. If a large amount of pellet material is swallowed, consult a physician for medical treatment. INHALATION: Not probable due to physical form of the product. MELT PROCESSING FIRST AID MEASURES: - For skin contact with molten plastic material, cool rapidly with water or ice and consult a physician for medical treatment. - For processing fume inhalation or irritation, immediately leave the contaminated area for fresh air. If coughing, difficulty breathing or other respiratory symptoms develop, consult a physician for medical treatment. - For skin contact with fume condensate, wash thoroughly with soap and water. If irritation develops, consult a physician for medical treatment. FIRE FIGHTING MEASURES FLAMMABLE PROPERTIES Flash Point:Not available Method used:Not available FLAMMABLE LIMITS LFL:Not available UFL:Not available EXTINGUISHING MEDIA: Water spray, foam, carbon dioxide (C02) or dry chemical. FIRE & EXPLOSION HAZARDS: During a fire, irritating smoke and toxic gases and aerosols may be generated by thermal decomposition and combustion. Refer to STABILITY AND REACTIVITY SECTION, "HAZARDOUS DECOMPOSITON PRODUCTS". FIRE FIGHTING EQUIPMENT: Approved pressure demand breathing apparatus and full protective equipment should be worn by fire fighting personnel to extinguish fires. SABIC Ssh R=5800 RD4D128 Page 4 ACCIDENTAL RELEASE MEASURES Loose pellets may present a slipping hazard. Sweep up immediately and place in proper container for disposal and/or recovery. HANDLING STORAGE Store in a cool dry warehouse. Excessive heat may cause a build-up of fumes from this product in the head space of the container. Refer to STABILITY AND REACTIVITY SECTION, "HAZARDOUS DECOMPOSITION PRODUCTS". . EXPOSURE CONTROLS/PERSONAL PROTECTION RESPIRATORY PROTECTION: With properly designed ventilation, use of respiratory protection should not be necessary. When processing fumes are not adequately controlled, use a NIOSH/MSHA approved respirator for the hazard present. When dust or powders from secondary operations such as grinding, sanding or cutting are not adequately controlled, use a NIOSH/MSHA approved respirator for the hazard present. SKIN PROTECTION: When handling pelletized material, avoid prolonged or repeated contact with the skin. Wear long pants, long sleeve shirt, well insulated gloves and faceshield for protection from thermal burns. EYE PROTECTION: Safety glasses or chemical tight goggles. EXPOSURE GUIDELINE(S): Refer to COMPOSITION/INFORMATION ON INGREDIENTS SECTION. ENGINEERING CONTROLS: Provide local exhaust ventilation to remove fumes and/or dust which may be generated during processing of this product. Ventilation design requirements must be locally determined to limit exposures in the workplace. SABIC SG shiny R-5800 RD4D128 Page 6

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.