Note: Ingredients listed on restricted chemical lists
EC/CAS
229-912-9/6834-92-0
Name of the chemical
Disodium metasilicate
Concentration
0<=x%<2.5
General Information
Revision date
2014-02-21
Product name
SYNCLAIR A/C
1.2.1 Relevant identified uses
Cleaner
1.2.2. Uses advised against
are identified
Emergency telephone
+33 (0)1 45 42 59 59
Icons in SDS
Company Information
company name
Socomore Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
techdirsocomore@socomore.com
Section 2
2.1 Classification of the substance or mixture
In compliance with directives 67/548/EEC, 1999/45/EC and their amendments. Corrosive (C, R 35). This mixture does not present a physical hazard. Refer to the recommendations regarding the other products present on the site. This mixture does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use.
2.2 Label elements
Detergent mixture (see section 15). Mixture for spray application. In compliance with directives 67/548/EEC, 1999/45/EC and their amendments.
Hazard pictograms
Corrosive
Hazard statements
R 35 Causes severe burns.
Precautionary statements
S 23 Do not breathe vapour. S 23 Do not breathe spray S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S 60 This material and its container must be disposed of as hazardous waste.
2.3 Other hazards
The mixture does not contain any substances classified as 'Substances of Very High Concern' (SVHC) by the European CHemical s Agency (ECHA) under article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table The mixture satisfies neither the PBT nor the vPvB criteria for mixtures in accordance with annexe XIII of the REACH regulations EC 1907/2006.
