Note: Ingredients listed on restricted chemical lists
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
N/A
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
N/A
EC/CAS
215-222-5
Name of the chemical
Zinc oxide (2)
Concentration
N/A
General Information
Revision date
2019-03-26
Product name
SeaForce 30
supplier name
SML MARINE PAINTS
Emergency telephone
NHS Direct; phone 0845 4647 or 111. Open 24/7
Icons in SDS
Company Information
company name
SML MARINE PAINTS
e-mail address of the competent person responsible for the Safety Data Sheet
SDSJotun@jotun.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H302, H315, H317, H318, H335, H361d, H400, H410
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
1272/2008]
Product definition
Mixture
CLP CLASSIFICATION
Flam. Liq. 3, H226 Acute Tox. 4, H302 Skin Irrit. 2, H315 Eye Dam. 1, H318 Skin Sens. 1, H317 Repr. 2, H361d (Unborn child) STOT SE 3, H335 Aquatic Acute 1, H400 Aquatic Chronic 1, H410 The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended. See Section 11 for more detailed information on health effects and symptoms.
Signal word
Danger
Hazard statements
H226 - Flammable liquid and vapour. H302 - Harmful if swallowed. H318 - Causes serious eye damage. H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H361d - Suspected of damaging the unborn child. H335 - May cause respiratory irritation. H410 - Very toxic to aquatic life with long lasting effects.
Precautionary statements
General : Not applicable.
Prevention
P201 - Obtain special instructions before use. P261 - Avoid breathing vapour. P280 - Wear protective gloves. Wear eye or face protection. Wear protective clothing. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P271 - Use only outdoors or in a well-ventilated area. P273 - Avoid release to the environment.
Response
P391 - Collect spillage. P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P333 + P313 - If skin irritation or rash occurs: Get medical attention. P305 + P351 + P338 + P310 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or physician.
Storage
P403 - Store in a well-ventilated place. P235 - Keep cool.
Disposal
P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazardous Ingredients
dicopper oxide xylene colophony zineb fatty acids, C14-18 and C16-18-unsatd., maleated
Supplemental label elements
Not applicable. elements
Additional information
Antifouling. Active substances: dicopper oxide (CAS 1317-39-1) 28.8% w/w, zineb before use. Do not reuse empty containers. For professional use only. HSE No. 8237 DO NOT BREATHE SPRAY MIST. WEAR SUITABLE PROTECTIVE CLOTHING (COVERALLS OF A CONTRASTING COLOUR TO THE PRODUCT BEING APPLIED, UNDERNEATH A DISPOSABLE COVERALL WITH HOOD), SUITABLE GLOVES AND IMPERVIOUS FOOTWEAR THAT PROTECTS THE LOWER LEG. WEAR SUITABLE RESPIRATORY EQUIPMENT (such as air-fed respiratory protective equipment with combined protective helmet and visor) when spraying. WEAR SUITABLE RESPIRATORY EQUIPMENT (such as FFP3 or an equivalent standard) when working in the vicinity of the spray plume. DISPOSE OF PROTECTIVE GLOVES after use. In compliance : IMO Antifouling System Convention compliant (AFS/CONF/26).
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Not applicable.
Special packaging requirements
Containers to be fitted Not applicable. with child-resistant fastenings
Tactile warning of danger
Not applicable.
Other hazards which do not result in classification
None known.
