TGB Bond Base

Hazard statements (CLP)

H315, H317, H318, H319, H400, H410, H411

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the mixture

Hazard categories

Hazard Statements Aquatic Environment Acute Category 1 H400 Aquatic Environment Long-term Category 1 H410 Serious Eye Damage I Eye Category 1 H319 Irritation Skin sensitization Category 1 H317 Chronic aquatic toxicity Category 2 H411 Skin Corrosion/ Irritation Category 2 H315 For the full text of the H-Statements mentioned in this section, see Section 16 Primary route of exposure – skin or eye contact, Most important adverse effects – skin or eye irritation or sensitization Human Health – see section 11 for toxicological information Physical and Chemical Hazards – see section 9 for physiochemical information Potential Environmental Effects – see section 12 for environmental information SMC Manufacturing (UK) Ltd Page 1 of 12 TGB Bond Base Coat

Hazard pictograms

GHS05 GHS07 GHS09

Signal word

Danger

Hazard statements

H315 Causes skin irritation H317 May cause an allergic skin reaction H318 Causes serious eye damage H319 Causes serious eye irritation H400 Very toxic to aquatic life H410 Very toxic to aquatic life with lasting effects

Prevention

P261 Avoid breathing dust/fume/gas/mist/vapours/ spray. P262 Do not get in eyes, on skin, or on clothing. P264 Wash face, hands and any exposed skin thoroughly after handling P272 Contaminated work clothing should not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection P302+P352 IF ON SKIN: Wash with plenty of soap and water. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. EUH208

Contains

1,2-ethanediyl diacrylate. May produce an allergic reaction

Response

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER or doctor/physician. P321 Specific treatment (see supplemental first aid instructions on this label).

Storage

P362+P364 Take off contaminated clothing and wash it before reuse. P332+P313 If skin irritation or rash occurs: Get medical advice/attention P337+P313 If eye irritation persists: Get medical advice/ attention. P363 Wash contaminated clothing before reuse P391 Collect spillage P501 Dispose of contents/container in accordance with local and national regulations

2.3 Other hazards

• Polymerization may occur from excessive heat, contamination or exposure to direct sunlight • Avoid skin contact • Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates SMC Manufacturing (UK) Ltd Page 2 of 12 TGB Bond Base Coat

2.1 Classification of the substance or mixture

Classification according to regulation (EC) No.1272/2008 Hazard Class Hazard Category Hazard Statements Aquatic Environment Acute Category 1 H400 Aquatic Environment Long-term Category 1 H410 Serious Eye Damage I Eye Category 1 H319 Irritation Skin sensitization Category 1 H317 Chronic aquatic toxicity Category 2 H411 Skin Corrosion/ Irritation Category 2 H315 For the full text of the H-Statements mentioned in this section, see Section 16. • Primary route of exposure – skin or eye contact, • Most important adverse effects – skin or eye irritation or sensitization • Human Health – see section 11 for toxicological information • Physical and Chemical Hazards – see section 9 for physiochemical information • Potential Environmental Effects – see section 12 for environmental information SMC Manufacturing (UK) Ltd Page 1 of 12 TGB Bond Base Coat