Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
<70 <10
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
<8
General Information
Revision date
2024-06-07
Product name
Smart HP PU Exterior Flake Primer 33
Chemical name
Not Applicable
1.2.1 Relevant identified uses
Use according to manufacturer"s directions
Icons in SDS
Company Information
company name
SMART PAINT MANUFACTURING SDN BHD (1031014-A)
e-mail address of the competent person responsible for the Safety Data Sheet
info@smart-paints.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H302, H304, H315, H335, H336, H411
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classification of the substances or mixture GHS Classification Flammable liquids - Category 3
Health hazards
Acute toxicity (Oral) - Category 4 Skin Irritation - Category 2 Aspiration Toxicity - Category 1 Specific Target Organ Toxicity- Single Exposure (Respiratory system) - Category 3 Specific Target Organ Toxicity- Single Exposure (Central nervous system) - Category 3
Environmental hazards
Hazardous To The Aquatic Environment – Chronic Hazard - Category 2
Signal word
Warning
Hazard statements
H226 Flammable liquid and vapour. H302 Harmful if swallowed. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking. P233 Keep container tightly closed. P242 Wash thoroughly after handling. P243 Take precautionary measures against static discharge. P280 Wear protective gloves/protective clothing/eye protection/face protection. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P264 Wash thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment.
Response
P304+P340 IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing. P302+P352 IF ON SKIN: Wash with plenty of soap and water P332+P313 If skin irritation occurs Get medical advice / attention P370+P378 In case of fire: Use dry sand , dry chemical or alcohol-resistant foam to extinguish P391 Collect spillage.
Storage
P405 Store in locked up.
Disposal
P501 Dispose of content/ container to appropriate waste site or reclaimer in accordance with local or national regulations.
2.1 Classification of the substance or mixture
GHS Classification Flammable liquids - Category 3 Health Hazard Acute toxicity (Oral) - Category 4 Skin Irritation - Category 2 Aspiration Toxicity - Category 1 Specific Target Organ Toxicity- Single Exposure (Respiratory system) - Category 3 Specific Target Organ Toxicity- Single Exposure (Central nervous system) - Category 3 Environment Hazard Hazardous To The Aquatic Environment – Chronic Hazard - Category 2 Label elements GHS label elements Signal word Warning Hazard statement(s) H226 Flammable liquid and vapour. H302 Harmful if swallowed. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. H411 Toxic to aquatic life with long lasting effects. Precautionary statement(s) P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking. P233 Keep container tightly closed. P242 Wash thoroughly after handling. P243 Take precautionary measures against static discharge. P280 Wear protective gloves/protective clothing/eye protection/face protection. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P264 Wash thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. SECTION 2 HAZARDS IDENTIFICATION Precautionary statement(s) Response P304+P340 IF INHALED : Remove victim to fresh air and keep at rest in a position comfortable for breathing. P302+P352 IF ON SKIN: Wash with plenty of soap and water P332+P313 If skin irritation occurs : Get medical advice / attention P370+P378 In case of fire: Use dry sand , dry chemical or alcohol-resistant foam to extinguish P391 Collect spillage. Precautionary statement(s) Storage P405 Store in locked up. Precautionary statement(s) Disposal P501 Dispose of content/ container to appropriate waste site or reclaimer in accordance with local or national regulations. SECTION 3 COMPOSITION / INFORMATION OF INGREDIENTS CAS number % [weight] Name - <70 Resin 13463-67-7 <10 Pigment 1330-20-7 <10 Xylene 123-86-4 <8 Butyl Acetate 108-83-8 <2 2,6-dimethylheptan-4-one SECTION 4 FIRST AID MEASURES Description of first aid measure Eye contact ▪ Check or and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelid open. Do not use an eye ointment. Seek for medical attention. Skin contact ▪ Frequent or prolonged contact may irritate and cause dermatitis. Skin contact may aggravate an exiting dermatitis condition. Remove contaminated clothing – launder before reuse. Wash gently and thoroughly the contaminated skin with running water and non-abbrasive soap. Get medical attention if redness or irritation occurs. Inhalation ▪ High vapour (>1000 ppm) are irritating to the eyes and respiratory tract, may cause headaches, dizziness, anaesthesia. Drowsine unconsciousness and other central nervous system effects. Evacuate the victim to a safe area as soon as possible. If the victim is not breathing, perform mouth to mouth resuscitation. Administer oxygen if available. Allow the victim to rest in a well ventilated area. Seek medical attention. SECTION 5 FIREFIGHTING MEASURES Suitable Fire Extinguishing Media : Small fire : Use dry chemical. Foam or CO2. Large fire : Use water spray. Fog or foam. Water or foam may cause frothing. Special Protective Actions For Fire Fighters: Cool container in water spray in order to prevent pressure build-up, auto ignition or explosion. Avoid flushing spilled material into sewers, stream or other bodies of water. For small outdoor fires, portable fire extinguishers may be used, and self contained breathing apparatus (SCBA) may not be required. Respiratory and eye protection are required for fire fighting personnel. Specific Hazards Arising From The Chemical : Static discharge, material can accumulate static charges which can cause an incendiary electrical discharge. “Empty” containers retain product residue (liquid and/or vapour) and can be dangerous. DO NOT pressurize, cut. Weld braze, solder, drill grind, or expose such containers to heat, flame sparks, static electricity, or other sources of ignition ; they may explode and cause injury or death. SECTION 6 ACCIDENTAL RELEASE MEASURES Personal Precautions, Protective Equipment And Emergency Procedure Eye /skin protection : Where there is potential for eye contact, wear chemical goggles and have eye flushing equipment immediately available. Wear appropriate protective clothing and chemical resistant gloves to prevent skin contact. Wear a face shield and chemical resistant clothing such as rubber apron when splashing is likely. Respiratory Protection : Use JKKP/NIOSH approved respiratory protection (full face piece recommended) when exposure limits are exceeded. Ventilation : Provide natural or mechanical ventilation to control exposure levels below airborne exposure limits. If practical, use local mechanical exhause ventilation at source of air contamination such as open process equipment.