Bleed-Through Ink Marker Jumbo - Blue

Hazard statements (CLP)

H226, H302, H303, H315, H332, H335, H336, H340, H401

Code

Statements

H226

Flammable liquid and vapour

SECTION 2: Hazards identification

(29 CFR 1910.1200) Classification

2.2 Label elements

Emergency Overview

Signal word

Danger

Hazard statements

Skin irritation Eye irritation Respiratory irritation May be harmful if swallowed Harmful if inhaled Mat cause drowsiness or dizziness Flammable liquid and vapour Toxic to aquatic life Appearance – Opaque, Blue Physical state- liquid Odor – Petroleum Odor

Prevention

Do not handle until all safety precautions have been read and understood Keep container tightly closed Avoid breathing dust/vapors/fumes Wash face and hands and any exposed skin thoroughly after handling Wear protective gloves/clothing/eye protection/face protection Use personal protection as required Keep away from heat, sparks, open flame No smoking Use in a well-ventilated area Store in well ventilated place Keep tightly closed Avoid release to the environment General Advice If exposed or concerned: get medical attention/advice ACUTE HAZARD: At high concentration, dizziness and drowisness may occur. CAUTION: Contains Aromatic Hydrocarbon, Xylene, and Ethyl Benzene. Harmful or fatal if swallowed. May cause genetic defects or cancer. Direct contact may cause skin or eye irritation. KEEP OUT OF REACH OF CHILDREN. Eyes Rinse cautiously with water for several minutes. Remove contact lenses if present. Continue rinsing. If irritation persists seek medical attention/advice. Skin Remove contaminated clothing. Rinse skin with water/shower. If irritation persists seek medical attention/advice. Inhalation Remove patient to fresh air and keep at rest in a comfortable position for breathing. Seek medical attention immediately. Deliberate concentration and inhalation can be harmful or fatal. Ingestion If accidentally swallowed seek medical attention immediately. Do not induce vomiting. Fire Use CO2, dry chemical, alcohol-resistant foam, water fog Spills and Leaks Contain and collect spillage. Large spills of this product are unlikely due to product form. If marking pen leaks, wipe up any free liquid, and place the pen and waste in an appropriate container for disposal. In storage where large numbers of pens may be damaged, eliminate all sources of ignition, ventilate area and collect the pens into a container for disposal. Collect any released liquid with an inert absorbent and place in a container for disposal.

Storage

Store in dry well ventilated place. Eliminate all sources of ignition. Store away from heat and flame. Keep tightly sealed. Prevent unauthorized access.

Disposal

Dispose of contents/container in approved waste disposal plant

2.3 Other hazards

Not applicable

2.1 Classification of the substance or mixture

This chemical is considered hazardous according to the OSHA Hazard Communications Standard 2012 (29 CFR 1910.1200). The marking pen contains from 13 to 20 ml of liquid. The liquid contents are only released in a controlled manner when the tip of the pen is pressed. No free liquid is present under normal conditions of use.