SET XP - RESIN PART

Simpson Strong - Tie

Revision date : 2011-05-31

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08 GHS09
Health risk rating 4
Safety risk rating 1
Environmental risk rating 4

Note: Ingredients listed on restricted chemical lists

EC/CAS

500-033-5/25068-38-6

Name of the chemical

4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane

Concentration

25 <= x % < 50

Listed in

EC/CAS

236-675-5/13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

2.5<=x%<10 1<=x%<2.5

EC/CAS

219-376-4/2426-08-6

Name of the chemical

1-Butoxy-2,3-epoxypropan

Concentration

-412 10-37-

General Information

Revision date

2011-05-31

Product name

SET XP - RESIN PART

1.2.1 Relevant identified uses

Bi-component system to obtain a final hardened, non-reactive material

Icons in SDS

GHS07 GHS08 GHS09 T050

Company Information

company name

Simpson Strong - Tie

e-mail address of the competent person responsible for the Safety Data Sheet

safetyuk@strongtie.com

GHS Information

Signal word

Warning

Hazard Codes

Hazard statements (CLP)

H315, H317, H319, H335, H341, H351, H411

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

2.1 Classification of the substance or mixture

In compliance with EC regulation No. 1272/2008 and its amendments. Skin irritation, Category 2. Eye irritation, Category 2. Skin sensitisation, Category 1. Germ cell mutagenicity, Category 2. Carcinogenicity, Category 2. Specific target organ toxicity (single exposure), Category 3. Hazardous to the aquatic environment - Chronic hazard, Category 2. This mixture does not present a physical hazard. Refer to the recommendations regarding the other products present on the site. In compliance with directives 67/548/EEC, 1999/45/EC and their amendments. Possibility of skin sensitisation. The mixture may also irritate the skin and prolonged contact may aggravate this effect. Possibility of irritation to the eyes, by inhalation and skin. Possibility of category three mutagenic effects. Possibility of category three carcinogenic effects. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. This mixture does not present a physical hazard. Refer to the recommendations regarding the other products present on the site.

2.2 Label elements

In compliance with EC regulation No. 1272/2008 and its amendments.

Hazard pictograms

GHS07 GHS09 GHS08 Harmful Dangerous for the environment

Signal word

WARNING

Product definition

EC *608-164-0 BISPHENOL F - EPICHLORHYDRIN RESIN WITH NUMBER AVERADGE MOLECULAR WEIGHT < 700 603-074-00-8 REACTION PRODUCT: BISPHENOL-A-(EPICHLORHYDRIN) EPOXY RESIN (NUMBER AVERAGE MOLECULAR WEIGHT < 700) 603-039-00-7 BUTYL GLYCIDYL ETHER

Additional information

EUH205 Contains epoxy constituents. May produce an allergic reaction.

Hazard statements

H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H341 Suspected of causing genetic defects . H351 Suspected of causing cancer . H411 Toxic to aquatic life with long lasting effects. R 51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R 43 May cause sensitisation by skin contact. R 36/37/38 Irritating to eyes, respiratory system and skin. R 40 Limited evidence of a carcinogenic effect. R 68 Possible risk of irreversible effects. Contains epoxy constituents. See information supplied by the manufacturer.

Prevention

P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing vapours. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection.

Response

P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned: Get medical advice/attention. P312 Call a POISON CENTER or doctor/physician if you feel unwell. P332 + P313 If skin irritation occurs: Get medical advice/attention. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P337 + P313 If eye irritation persists: Get medical advice/attention. P362 Take off contaminated clothing and wash before reuse. P391 Collect spillage.

Storage

P403 + P233 Store in a well-ventilated place. Keep container tightly closed.

Precautionary statements

Disposal P501 Dispose of contents/container at a disposal facility in accordance with local regulations. In compliance with directives 67/548/EEC, 1999/45/EC and their amendments. S 36/37 Wear suitable protective clothing and gloves. S 61 Avoid release to the environment. Refer to special instructions/Safety data sheets. S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 39 Wear eye/face protection. S 60 This material and its container must be disposed of as hazardous waste. S 57 Use appropriate container to avoid environmental contamination.

Contains

EC *608-164-0 BISPHENOL F - EPICHLORHYDRIN RESIN WITH NUMBER AVERADGE MOLECULAR WEIGHT < 700 603-039-00-7 BUTYL GLYCIDYL ETHER 603-074-00-8 REACTION PRODUCT: BISPHENOL-A-(EPICHLORHYDRIN) EPOXY RESIN (NUMBER AVERAGE MOLECULAR WEIGHT < 700)

2.3 Other hazards

No data available.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.