Note: Ingredients listed on restricted chemical lists
EC/CAS
500-033-5/25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
30-50
EC/CAS
614-122-2/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
1-5
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
10-30
EC/CAS
216-032-5/1477-55-0
Name of the chemical
1,3-benzenedimethanamine
Concentration
1-10
EC/CAS
202-859-9/100-51-6
Name of the chemical
Benzyl Alcohol
Concentration
1-10
EC/CAS
202-013-9/90-72-2
Name of the chemical
2,4,6-tris(dimethylaminomethyl)phenol
Concentration
1-5
General Information
Revision date
2022-12-01
Product name
SET-3G
1.2.1 Relevant identified uses
SET-3G is a high-strength epoxy adhesive
1.2.2. Uses advised against
To ensure proper installation, use according to package directions. Complete application instructions can be found in Simpson Strong-Tie catalogs or online at strongtie.com
Emergency telephone
1-800-535-5053, 1-352-323-3500
Icons in SDS
Company Information
company name
Simpson Strong-Tie Company Inc
GHS Information
Signal word
WARNING!
Hazard Codes
Hazard statements (CLP)
H314, H315, H317, H318, H319, H411
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage
Section 2
SECTION 2: Hazards identification
OSHA Hazards General Information SET-3G is a two component (1:1) system packaged as a single unit in a dual cartridge. The two parts of this product have been individually assessed according to the Globally Harmonized System (GHS). The mixed product can be assumed to carry the hazards of each component until the product has fully hardened. Exposure to individual components will only occur with improper use. The final cured product will be uniformly gray in color and can be considered nonhazardous. Some hazards may apply upon grinding or cutting through hardened product. This Safety Data Sheet covers the hazards and responses for the safe use of this product. Resin (White Side) GHS Classification Classification according to HazCom2012 (GHS)
Physical hazards
Not Classified Not Classified.
Health hazards
Skin Corrosion/Irritation Category 2 H315: Causes skin irritation Serious Eye Damage/Irritation Category 2 H319: Causes serious eye irritation Sensitization, Skin Category 1 H317: May cause an allergic skin reaction Environmental Hazards: Chronic Aquatic Hazard Category 2 H411: Toxic to aquatic life with long lasting effects Main Symptoms Irritation of eyes and skin. Symptoms include redness, itching, burning, tearing, swelling, and blurred vision May cause rash/allergic reaction to the skin Skin Corrosion/Irritation Category 1 H314: Causes severe skin burns Serious Eye Damage/Irritation Category 1 H318: Causes serious eye damage Sensitization, Skin Category 1 H317: May cause an allergic skin reaction Carcinogenicity Category 1A
2.2 Label elements
Exclamation Environmental Point Exclamation Corrosive Point
Contains
Epoxy Resins, Neopentyl glycol diglycidyl ether Amines, Crystalline Silica (Quartz), Benzyl Alcohol
Signal word
WARNING! DANGER!
Hazard statements
H315: Causes skin irritation. H319: Causes serious eye irritation. H317: May cause an allergic skin reaction. H411: Toxic to aquatic life with long lasting effects. H314: Causes severe skin burns and eye damage. H318: Causes serious eye damage. H317: May cause an allergic skin reaction. May cause cancer. Causes damage to organs (lungs) with prolonged and repeated exposure. Chronic Health Can form explosive air-dust mixtures, avoid creating dust.
Prevention
P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P261: Avoid breathing mist or vapor. P264: Wash thoroughly after handling. P272: Contaminated work clothing should not be allowed out of the workplace. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe dust, mist, or vapor. P264: Wash thoroughly after handling. P272: Contaminated work clothing must not be allowed out of the workplace. P280: Wear protective gloves/protective clothing/eye protection/face protection.
Response
P302+P352: IF ON SKIN: Wash with plenty of water. P333+P313: If skin irritation or rash occurs: Get medical advice/attention. P362+P364: Take off contaminated clothing and wash before re-use. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice/attention. P391: Collect Spillage. P301+P330+P331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting P310: Immediately call a POISON CENTER/doctor. P303+P361+P353 IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water/shower. P333+P313: If skin irritation or rash occurs: Get medical advice/attention. P363: Wash contaminated clothing before reuse. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice/attention.
Storage
P403: Store in a well-ventilated place. P405: Store locked up. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P405: Store locked up.
Disposal
P501: Dispose of contents/container in accordance with local regulations. P501: Dispose of contents/container in accordance with local/regional regulations.
Supplemental label elements
None known Hardener (Black Side) GHS Classification None known
EU Classification
HazCom2012 (GHS)
Environmental hazards
Not Classified Main Symptoms: Damage to the eyes and skin. Symptoms include burns, redness, itching, tearing, swelling, and blurred vision. May cause rash/allergic reaction to the skin.
2.3 Other hazards
The above hazards are for the uncured SET-3G. Upon full cure, an innocuous solid which does not present any immediate hazards is formed. Upon grinding or cutting through the cured product, the following hazards may apply. Ensure that good work practices, and the necessary precautionary measures, are taken to maintain safe use of the product.
Precautionary statements
Do not breathe dust. Do not allow dust to build up on surfaces.
2.1 Classification of the substance or mixture
Physical Hazards: Not Classified. Health Hazards: Skin Corrosion/Irritation Category 2 H315: Causes skin irritation Serious Eye Damage/Irritation Category 2 H319: Causes serious eye irritation Sensitization, Skin Category 1 H317: May cause an allergic skin reaction Environmental Hazards: Chronic Aquatic Hazard Category 2 H411: Toxic to aquatic life with long lasting effects Main Symptoms: Irritation of eyes and skin. Symptoms include redness, itching, burning, tearing, swelling, and blurred vision. May cause rash/allergic reaction to the skin.