RPS-505

Hazard statements (CLP)

H315, H317, H332, H351

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

OSHA Hazards General Information RPS-505 Water-Based Acrylic Coating is a single component product for use for protecting concrete, masonry, and stucco. This product has been assessed according to the Globally Harmonized System (GHS). The product can be assumed to carry its hazards until the product has been fully cured. The final hardened material is gray or white in color and can be considered nonhazardous. Some hazards apply upon grinding or cutting through hardened product. This Safety Data Sheet covers hazards and responses for the safe use and handling of RPS-505.

EU Classification

HazCom2012 (GHS)

Physical hazards

Not Classified.

Health hazards

Acute Toxicity, Inhalation Category 4 H332: Harmful if inhaled Skin Corrosion/Irritation Category 2 H315: Causes skin irritation Sensitization, Skin Category 1 H317: May cause an allergic skin reaction Carcinogenicity Category 2 H351: Suspected of causing cancer Carcinogenicity Category 1A

Environmental hazards

Not Classified Main Symptoms: Irritation of skin. Symptoms include redness, itching, and burning; discomfort in the chest, shortness of breath, or coughing. May cause rash/ allergic reaction to skin. Long term exposure may cause chronic effects.

2.2 Label elements

Chronic Exclamation Health Point

Contains

Acrylic Polymers, Titanium Dioxide, Ethylene Glycol, Ammonium Hydroxide, Quartz

Signal word

WARNING!

Hazard statements

H332: Harmful if inhaled. H315: Causes skin irritation. H317: May cause an allergic skin reaction. H351: Suspected of causing cancer. May cause cancer. Can form explosive air-dust mixtures; avoid creating dust. Chronic Health

Prevention

P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe mist or vapor. P264: Wash hands thoroughly after handling. P272: Contaminated clothing should not be allowed out of the workplace. P280: Wear protective gloves/clothing/eye protection/face protection.

Response

P302+P352: IF ON SKIN: Wash with plenty of water. P332+P313: If skin irritation occurs: Get medical advice/attention. P362+P364: Take off contaminated clothing and wash it before reuse. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice/attention. P308+P313: If exposed or concerned: Get medical advice/attention. P314: Call a POISON CENTER/doctor if you feel unwell. P391: Collect spillage.

Storage

P403: Store in a well-ventilated place. P405: Store locked up. P420: Store away from incompatible materials.

Disposal

P501: Dispose of contents/container in accordance with local/regional regulations.

Supplemental label elements

None known

2.3 Other hazards

The above hazards are for the uncured RPS-505. Upon grinding or cutting through the cured product, the following hazards may apply. Ensure that good work practices, and the necessary precautionary measures, are taken to maintain safe use of the product.

Precautionary statements

Do not breathe dust. Do not allow dust to build up on surfaces.