B Component FX-752 (FX752-1QTB, FX752-1B, FX752-5B)

SECTION 2: Hazards identification

GHS Classification General Information FX-752 is a two part system. The two parts of this product have been assessed according to GHS. This Safety Data Sheet covers hazards and responses for Component B. See Component A Safety Data Sheet for complete product information. Component B GHS Classification

Physical hazards

Not Classified.

Health hazards

Acute Toxicity, Oral Category 4 Acute Toxicity, Dermal Category 4 Acute Toxicity, Inhalation Category 4 Skin Corrosion/Irritation Category 1 Serious Eye Damage/Irritation Category 1 Sensitization, Skin Category 1 Germ Cell Mutagenicity Category 2 Reproductive Toxicity Category 2 STOT, Single Exposure Category 3 (Respiratory Irritation) STOT, Repeated Exposure Category 2 (Central Nervous System, Liver, Kidney) Carcinogenicity Category 1A STOT, Repeated Exposure Category 2 (Lung)

Environmental hazards

Acute Environmental Hazard Category 1 Chronic Environmental Hazard Category 1

Signal word

DANGER!

Hazard statements

Harmful if swallowed. Harmful in contact with skin. Harmful if inhaled. Causes severe skin burns and eye damage. May cause an allergic skin reaction. May cause respiratory irritation. Suspected of causing genetic defects. Suspected of damaging fertility or the unborn child. May cause damage to organs (central nervous system, kidney, liver) through prolonged or repeated exposure. Very toxic to aquatic life with long lasting effects. May cause cancer. May cause damage to organs (lung) through prolonged or repeated exposure (processing dust).

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Wear protective gloves/clothing/eye protection/face protection. Do not breathe mist or vapor. Use only outdoor or in a well-ventilated area. Do not eat, drink, or smoke when using this product. Wash thoroughly after handling. Contaminated clothing should not be allowed out of the workplace. Avoid release to the environment.

Response

In case of fire Use appropriate media to extinguish. If exposed or concerned Get medical attention/advice. If swallowed Rinse mouth. Do NOT induce vomiting. If inhaled Remove person to fresh air and keep comfortable for breathing. If on skin: Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a poison center/doctor if you feel unwell. If skin irritation or rash occurs, or eye irritation persists: Get medical advice/attention. Collect spillage.

Storage

Store locked up. Store in a well-ventilated place. Keep container tightly closed.

Disposal

Dispose of contents/container in accordance with local/regional/national regulations.

2.3 Other hazards

The above hazards are for the uncured B component of FX-752. Upon combination with the A component of FX-752 an innocuous solid coating is formed which does not present any immediate hazards. Upon grinding or cutting through the cured coating the following hazards may apply.

Precautionary statements

Do not breathe dust.