Note: Ingredients listed on restricted chemical lists
EC/CAS
500-033-5/25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
65-85
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
<20
General Information
Revision date
2016-08-01
Product name
A Component FX-70-9
1.2.1 Relevant identified uses
FX-70-9 Epoxy Coating is a protective coating for use with steel, concrete and wood
1.2.2. Uses advised against
For industrial use only. To ensure proper installation, use according to package directions Complete application instructions can be found in Simpson Strong-Tie catalogs or online at strongtie.com
Emergency telephone
1-800-535-5053, 1-352-323-3500
Icons in SDS
Company Information
company name
Simpson Strong-Tie Company Inc
GHS Information
Signal word
WARNING!
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H411
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
OSHA Hazards General Information FX-70-9 Epoxy Coating is a 100% solids, two part system (2A:1B mix) designed to protect steel, wood, and concrete surfaces in commercial and industrial settings. It is available in brown, limestone, light gray, brick red, and white. The two parts of this product have been assessed individually according to the Globally Harmonized System (GHS). The mixed product can be assumed to carry the hazards of each component until the product has been fully cured. This Safety Data Sheet covers hazards and responses for Component A. See Component B Safety Data Sheet for complete product information. Component A GHS Classification Classification according to HazCom 2012 (GHS)
Physical hazards
Not Classified
Health hazards
Skin Corrosion/Irritation Category 2 H315: Causes skin irritation Serious Eye Damage/Irritation Category 2 H319: Causes serious eye irritation Sensitization, Skin Category 1 H317: May cause an allergic skin reaction Environmental Hazards: Chronic Environmental Hazard Category 2 H411: Toxic to aquatic life with long lasting effects Main Symptoms Irritation of eyes and skin. Symptoms include redness, itching, burning, tearing, swelling, and blurred vision May cause rash/allergic reaction to the skin Carcinogenicity Category 1A
2.2 Label elements
Exclamation Environmental Point
Contains
Bisphenol-A Based Epoxy Resin, Titanium Dioxide, Castor Oil Glycidyl Ether
Signal word
WARNING!
Hazard statements
H315: Causes skin irritation. H319: Causes serious eye irritation. H317: May cause an allergic skin reaction. H411: Toxic to aquatic life with long lasting effects. May cause cancer. Can form explosive air-dust mixtures, avoid creating dust. Chronic Health
Prevention
P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P261: Avoid breathing dust, mist, or vapor. P264: Wash thoroughly after handling. P272: Contaminated clothing should not be allowed out of the workplace. P273: Avoid release to the environment. P280: Wear protective gloves/clothing/eye protection/face protection.
Response
P302+P352: IF ON SKIN: Wash with plenty of water. P333+P313: If skin irritation or rash occurs: Get medical advice/attention. P362+P364: Take off contaminated clothing and wash before reuse. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice/attention. P308+P313: If exposed or concerned: Get medical advice/attention. P391: Collect spillage.
Storage
P403: Store in a well-ventilated place. P405: Store locked up.
Disposal
P501: Dispose of contents/container in accordance with local/regional regulations.
Supplemental label elements
None known
2.3 Other hazards
The above hazards are for the uncured A component of FX-70-9. Upon combination with the B component, an innocuous solid which does not present any immediate hazards is formed. Upon grinding or cutting through the cured product, the following hazards may apply. Ensure that good work practices, and the necessary precautionary measures, are taken to maintain safe use of the product.
Precautionary statements
Do not breathe dust. Do not allow dust to build up on surfaces.
2.1 Classification of the substance or mixture
Classification according to HazCom 2012 (GHS) Physical Hazards: Not Classified. Health Hazards Skin Corrosion/Irritation Category 2 H315: Causes skin irritation Serious Eye Damage/Irritation Category 2 H319: Causes serious eye irritation Sensitization, Skin Category 1 H317: May cause an allergic skin reaction Environmental Hazards: Chronic Environmental Hazard Category 2 H411: Toxic to aquatic life with long lasting effects Main Symptoms: Irritation of eyes and skin. Symptoms include redness, itching, burning, tearing, swelling, and blurred vision. May cause rash/allergic reaction to the skin.
