General Information
Revision date
2023-08-01
Product name
AT-HP Component A
1.2.1 Relevant identified uses
AT-HP is an anchoring adhesives for cracked and non-cracked concrete
1.2.2. Uses advised against
To ensure proper installation use according to package directions, complete application instructions can be found in Simpson Strong-Tie catalogs or online at strongtie.com
Icons in SDS
Company Information
company name
Simpson Strong-Tie Australia Pty Limited
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H319
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
General Information AT-HP is a high-performance chemical anchor for threaded rod and rebar into concrete masonry. It is a two component (10:1) system packaged as a single unit in a dual cartridge. The two parts of this product have been individually assessed according to the Globally Harmonized System (GHS). The mixed product can be assumed to carry the hazards of each component until the product has fully hardened. Exposure to individual components will only occur with improper use. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. The final cured product will be uniformly gray in color and can be considered nonhazardous. Some hazards may apply upon grinding or cutting through hardened product. This Safety Data Sheet covers the hazards and responses for the safe use of AT-HP Component A. Please see Safety Data Sheet for AT-HP Component B for additional product hazards. GHS Classification Classification according to HazCom2012 (GHS)
Physical hazards
Not Classified
Health hazards
Serious Eye Irritation Category 2 H319: Causes serious eye irritation Sensitization, Skin Category 1 H317: May cause an allergic skin reaction Environmental Hazards: Not classified Main Symptoms Irritation of eyes. Symptoms include redness, itching, burning, tearing, swelling, and blurred vision. May cause rash/allergic reaction to the skin
2.2 Label elements
Exclamation Point
Contains
2,2'-ETHYLENEDIOXYDIETHYL DIMETHACRYLATE, METHACRYLIC ACID, MONOESTER WITH PROPANE-1,2-DIOL, REACTION MASS OF 2,2'-[(4- METHYLPHENYL)IMINO]BISETHANOL AND ETHANOL 2-[[2-(2-HYDROXYETHOXY)ETHYL](4- METHYLPHENYL)AMINO]-
Signal word
Warning
Hazard statements
H319: Causes serious eye irritation. H317: May cause an allergic skin reaction.
Prevention
P102: Keep out of reach of children. P103: Read label before use. P202: Do not handle until all safety precautions have been read and understood. P261: Avoid breathing mist or vapor. P264: Wash thoroughly after handling. P272: Contaminated clothing should not be allowed out of the workplace. P280: Wear protective gloves/protective clothing/eye protection/face protection.
Response
P302+P352: IF ON SKIN: Wash with plenty of water. P333+P313: If skin irritation or rash occurs: Get medical advice/attention. P362+P364: Take off contaminated clothing and wash before reuse. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice/attention.
Storage
P405: Store locked up.
Disposal
P501: Dispose of contents/container in accordance with local/regional regulations.
Supplemental label elements
None known
2.1 Classification of the substance or mixture
Classification according to HazCom2012 (GHS) Physical Hazards: Not Classified. Health Hazards: Serious Eye Irritation Category 2 H319: Causes serious eye irritation Sensitization, Skin Category 1 H317: May cause an allergic skin reaction Environmental Hazards: Not classified. Main Symptoms: Irritation of eyes. Symptoms include redness, itching, burning, tearing, swelling, and blurred vision. May cause rash/allergic reaction to the skin.
