General Information
Revision date
2011-08-24
Product name
Silicone elastomer
Icons in SDS
Company Information
company name
Silco Incorporated
Section 2
Medical Conditions Generally Aggravated by Exposure
No known applicable information. The above listed potential effects of overexposure are based on actual data, results of studies performed upon similar compositions, component data and / or expert review of the product. Please refer to Section 11 for the detailed toxicology information. 4. FIRST AID MEASURES Inhalation: No first aid should be needed. Oral: No first aid is needed. Eye: Immediately flush with water for 15 minutes. Seek medical attention. Skin: Remove from skin and wash thoroughly with soap and water or waterless cleanser. Seek medical attention if irritation or other ill effects develop or persist. Comments: Treat according to person’s condition and specifics of exposure. 5. FIRE FIGHTING MEASURES Flash Point: >212° F /100 ° C (Closed Cup) Autoignition Temperature: Not determined Flammability Limits in Air: Not determined Extinguishing Media: On large scale fires use dry chemical foam or water spray. On small fires use carbon dioxide (CO2), dry chemical or water spray. Water can be used to cool fire exposed containers. Fire Fighting Measures: Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Determine the need to evacuate or isolate the area according to your local emergency plan. Use water spray to keep fire exposed containers cool. Usual Fire Hazards: None Hazardous Decomposition Products Thermal breakdown of this product during fire or very high heat conditions may evolve into the following hazardous products: carbon oxides, traces of incompletely burned carbon compounds, formaldehyde, and silicon dioxide.