Note: Ingredients listed on restricted chemical lists
EC/CAS
93925-42-9
Name of the chemical
Silicic acid (H4SiO4), tetraethyl ester, reaction products with bis(acetyloxy)dibutylstannane
Concentration
N/A
General Information
Revision date
2020-08-24
Product name
WACKER CATALYST T 77
supplier name
Sil-Mid Limited
Emergency telephone
+44 (0)1675 432850
Icons in SDS
Company Information
company name
Sil-Mid Limited
e-mail address of the competent person responsible for the Safety Data Sheet
info@silmid.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H317, H318, H360D, H360F, H360FD, H372
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 2.
Principle Routes of Exposure
H-Code Reproductive toxicity Category 1B H360D Reproductive toxicity Category 1B H360F Skin sensitisation Category 1 H317 Serious eye damage/eye irritation Category 1 H318 Acute toxicity Category 4 oral H302 Specific target organ toxicity - repeated exposure Category 1 H372
2.2 Label elements
Labelling according to Regulation (EC) No. 1272/2008:
Signal word
Danger H-Code
Hazard statements
H302 Harmful if swallowed. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H360FD May damage fertility. May damage the unborn child. H372 Causes damage to organs through prolonged or repeated exposure. P-Code
Precautionary statements
P280 Wear protective gloves/protective clothing/eye protection. P271 Use only outdoors or in a well-ventilated area. P305 + P351 + IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to P338 do. Continue rinsing. P310 Immediately call a POISON CENTER/ doctor. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P405 Store locked up. P501 Dispose of contents/container to waste disposal. Hazard ingredients (labelling): 1,2-Bis(triethoxysilyl)ethane 3-(2-Aminoethylamino)propyl trimethoxysilane Silicic acid, tetraethyl ester, RP with bis(acetyloxy)dibutylstannane Code
Additional information
Restricted to professional users.
2.3 Other hazards
The product hydrolyses under formation of methanol (CAS-Nr. 67-56-1). Methanol is classified concerning both physical and health hazards. The hydrolysis rate and consequently the relevance for the hazard profile of the product is strongly dependent on the specific conditions. The product hydrolyses under formation of ethanol (CAS-Nr. 64-17-5). Ethanol is classified concerning both physical and health hazards. The hydrolysis rate and consequently the relevance for the hazard profile of the product is strongly dependent on the specific conditions.
