Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-41-7
Name of the chemical
Beryllium
Concentration
N/A
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
EC/CAS
7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
N/A
General Information
Revision date
2016-04-10
Product name
SIDERGAS M5356
1.2.1 Relevant identified uses
Description/Usage Filler metal in wire and rods to weld and/or braze alluminium and his alloys by GMAW, GTAW, OFW
Manufacturer Name
Sidergas S.p.A
Emergency telephone
“Centro Antiveleno - Università di Torino” tel. 0039 011 6637637
Icons in SDS
Company Information
company name
Sidergas S.p.A
e-mail address of the competent person responsible for the Safety Data Sheet
info@sidergas.com
Section 2
SECTION 2: Hazards identification
Solid, Silvery, odourless. The product is not dangerous according CE Regulation. Non – Flammable as supplied. Small chips, fine turnings and dust may ignite readily. Explosion/fire hazards may be present when dust or fines are dispersed in the air or are in contact with water. Brazing fumes can be irritating if inhaled and if in contact with eyes. Ultraviolet radiation from welding can cause flash burns. See section 8. SECTION 3. Composition/information on elements Information on composition (according to Intenational Registration Record) Element Mg % Zn Mn Si Cu Cr Fe Ti Other cad. Other Tot. % p/p 4.70-5.0 0.25 0.50- 0.25 0.10 0.05- 0.40 0.05- 0.05 0.15 1.00 0.25 0.20 (1) 0008 Max Be - 0.10 – 0.60 Mn + Cr - Max values unless shown as a range or a minimum - Others tot. = sum of metallic elements esch ≥ 0,010% and expressed to the 2nd decimal before determinate the sum. - Chemical composition according International Registration Record.
