CRX0411-8G9B 3421

SECTION 2: Hazards identification

GHS Classification GHS Remark The additives in this product (if any) are bound in a thermoplastic resin matrix. In accordance with GHS for the

2.1 Classification of the substance or mixture

Not a hazardous substance or mixture.

2.2 Label elements

Not a hazardous substance or mixture.

Other hazards which do not result in classification

Version revision date MSDS Number: 1.0 26.07.2023 _S3l Li ° sabic. 0 gt Wn & In case of skin contact After contact with skin, wash immediately with plenty of cold water. Wash off immediately with soap and plenty of water. Consult a physician. If skin irritation persists, call a physician. In case of eye contact Immediately flush eye(s) with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, consult a specialist. If swallowed Negligible or unlikely exposure pathways If accidentally swallowed obtain immediate medical attention. Notes to physician ‘ No information available. 5. FIREFIGHTING MEASURES Suitable extinguishing media Use dry chemical, CO2, water spray or "alcohol" foam. Water is the best extinguishing medium. Carbon dioxide and dry chemical are not generally recommended because their lack of cooling capacity may permit re-ignition on larger resin fires (blobs, drools, etc.). Unsuitable extinguishing Do not use a solid water stream as it may scatter and spread media fire. Specific hazards during Avoid generating dust; fine dust dispersed in air in sufficient firefighting concentrations, and in the presence of an ignition source is a potential dust explosion hazard. Material is not sensitive to mechanical impact. Hazardous combustion Fire will produce dense black smoke containing hazardous products combustion products, carbon oxides, hydrocarbon fragments. If present, certain hazardous additives can also liberate halogenated hydrocarbons.

Further information

Take precautionary measures against static discharges. During processing, dust may form explosive mixture in air. Thermal decomposition can lead to release of irritating gases and vapours. Special protective equipment Wear self-contained breathing apparatus for firefighting if for firefighters necessary. Stay upwind/ keep distance from source. Explosive properties Not applicable 6. ACCIDENTAL RELEASE MEASURES Personal precautions, Take precautionary measures against static discharges. protective equipment and emergency procedures Environmental Product: Special Studies: The toxicological data has been taken from products of similar composition. 12. ECOLOGICAL INFORMATION Ecotoxicity No data available Persistence and degradability No data available Bioaccumulative potential No data available Mobility in soil No data available Other adverse effects Product: Additional ecological Do not flush into surface water or sanitary sewer system. information Ecological injuries are not known or expected under normal use. Version Revision Date: MSDS Number: 1.0 26.07.2023 “Syl LA) sabia ” importer, supplier EHSNR (Malaysia) For further information, please contact: Manufacturer, importer, supplier CICR (Turkey) For further information, please contact: Manufacturer, importer, supplier Other applicable national regulatory information TSCA list TSCA - 5(a) Significant New Use Rule List of Chemicals Not relevant TSCA - 12(b) Export Notification List of Chemicals Not relevant EPCRA - Emergency Planning and Community Right-to-Know Act CERCLA Reportable Quantity Components CAS-No. Component RQ | Calculated product RQ (Ibs) Methylene Chloride 75-09-2 1000 * *Note: Calculated RQ exceeds reasonably attainable upper limit. SARA 304 Extremely Hazardous Substances Reportable Quantity Components CAS-No. Component RQ | Calculated product RQ (Ibs) Acrylonitrile 107-13-1 100 * *Note: Calculated RQ exceeds reasonably attainable upper limit. SARA 302 Extremely Hazardous Substances Components CAS-No. Acrylonitrile 107-13-1 Calculated RQ exceeds reasonably attainable upper limit. SARA 311/312 Hazards No SARA Hazards SARA 302 No chemicals in this material are subject to the reporting requirements of SARA Title Ill, Section 302. SARA 313 This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title Ill, Section 313. Clean Air Act This product neither contains, nor was manufactured with a Class | or Class Il ODS as defined by the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B). This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air Act Section 12 (40 CFR 61). This product does not contain any chemicals listed under the U.S. Clean Air Act Section 112(r) for Accidental Release Prevention (40 CFR 68.130, Subpart F). Version Revision Date: MSDS Number: 1.0 26.07.2023 Solan sadlbsia NFPA: HMIS ill: Flammability s a 3 & x = < PHYSICAL HAZARD 0 . 0 =not significant, 1 =Slight, Special hazard. 25 Moderate. 3 =High g 4 = Extreme, * = Chronic Disclaimer This Safety Data Sheet (SDS) information is provided based on the hazard communication regulations for the region or country in which the purchaser is located and for the use of the persons required to receive this information under those regulations. The information is neither designed nor recommended for any other use or for use by any other person, including for compliance with other laws. This SDS is valid and applicable only to this product as initially sold by us. This SDS is not valid unless it has been obtained directly from Saudi Basic Industries Corporation or any of its affiliates, or posted or vewed on a SABIC website. Modification of this SDS, unless specifically authorized by us, is strictly prohibited. This SDS is based on information that is believed to be reliable at the date of its issuance, but may be subject to change as new information becomes available. Because it is not possible to anticipate all conditions of use, each purchaser and user of this product is responsible for making its own determination as to: (i) the safe and proper handling of this product in its own particular use of this material; and (ii) the suitability of this product for the users particular use. THE INFORMATION SET FORTH HEREIN DOES NOT CONSTITUTE OR CREATE ANY REPRESENTATION OR WARRANTY, EITHER EXPRESS OR IMPLIED, INCLUDING AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND DOES NOT ALTER OUR STANDARD CONDITIONS OF SALE. NFPA/HMIS disclaimer Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not the complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety., Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This waming system is intended to be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA 49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not, anyone using the 704 systems to classify chemicals does so at their own risk., Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS®@ ratings are to be used with a fully implemented HMIS® program. HMIS@ is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may be purchased exclusively from J. J. Keller (800) 327-6868. The customer is responsible for determining the PPE code for this material. US / EN End of Safety Data Sheet Version Revision Date: MSDS Number: 1.0 26.07.2023

Precautionary statements

Do not flush into surface water or sanitary sewer system. Should not be released into the environment. SABIC is committed to implementing Responsible Care® and global sustainability programs (such as The Alliance to End Plastic Version revision date MSDS Number: 1.0 26.07.2023 Asli sdisia hazard and toxic; remove periodically from exhaust hoods, ductwork, and other surfaces using appropriate personal protection. Personal protective equipment Respiratory protection Use adequate ventilation and/or engineering controls in high temperature processing to prevent exposure to vapours. If dust or powder are produced from secondary operations such as sawing or grinding, use a respirator approved for protection from dust. Hand protection Material Wear protective gloves. Eye protection Safety glasses with side-shields Chemical resistant goggles must be wom. Skin and body protection Long sleeved clothing Protective measures Wear suitable protective equipment. I Hygiene measures Do not eat, drink or smoke when using this product. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance pellets Physical state solid Colour white Odour none or slight Odour Threshold No information available. pH No data available Melting point/range This product does not exhibit a sharp melting point but softens gradually over a wide range of temperatures. Boiling point/boiling range not determined Flash point Not applicable Flammability ’ No information available. Upper explosion limit not determined Lower explosion limit not determined Vapour pressure negligible Relative vapour density not determined Relative density >1 (water = 1) Density not determined Water solubility insoluble Solubility in other solvents not determined Partition coefficient: n-octanol/water No information available. Auto-ignition temperature 630 °C estimated Decomposition temperature not determined Viscosity, dynamic Not applicable Viscosity, kinematic Not applicable 10. STABILITY AND REACTIVITY Version revision date MSDS Number: 1.0 26.07.2023 _&,| Li ¢ sdlbsia. * Components

Principle Routes of Exposure

Target Organs Assessment Titanium Dioxide PW6 Lungs Experience with human exposure Product: Inhalation

Remarks

Inhalation unlikely due to physical form Processing fumes evolved at recommended conditions may contain trace amounts of hazardous chemicals. Extreme processing conditions or temperatures may result in higher levels. Processing vapors may cause initation to the eyes, skin, and respiratory tract. In cases of severe exposure, nausea and headache can also occur. Grease-like processing vapor condensates on ventilation duct work, molds, and other surfaces can cause irritation and injury to skin. Skin contact Not a hazard during normal industrial use If present, some additives (like glass fiber or flame retardants) may cause skin imitation in susceptible persons. Eye contact Resin particles, like other inert materials, are mechanically irritating to eyes. Ingestion Ingestion unlikely due to physical form