Automotive Rust Proofing

SECTION 2: Hazards identification

OSHA Hazards GHS INFORMATION

2.1 Classification of the substance or mixture

Flammable Liquids, Category 4 Skin Irritation, Category 2 Germ Cell Mutagenicity, Category 1B Carcinogenicity, Category 1B Per GHS Flammability Categories: • Category 1 liquids have flash points below 73.4°F (23°C) and boiling points at or below 95°F (35°C). • Category 2 liquids have flashpoints below 73.4°F (23°C) and boiling points above 95°F (35°C). • Category 3 liquids have flashpoints at or above 73.4°F (23°C) and at or below 140°F (60°C). • Category 4 liquids have flash points above 140°F (60°C) and at or below 199.4°F (93°C).

Signal word

Danger

Hazard statements

Combustible liquid. Product does not sustain combustion, as per ASTM D4206 testing. Causes skin irritation. May cause genetic defects. May cause cancer.

Prevention

Obtain special instructions before use Do not handle until all safety precautions have been read and understood. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wash hands thoroughly after handling. Wear protective gloves, protective clothing and eye protection.

Response

IF ON SKIN Wash with plenty of water IF exposed or concerned: Get medical attention. If skin irritation occurs: Get medical attention. Take off contaminated clothing and wash it before reuse. In case of fire: Use dry chemical, CO2, water spray or alcohol-resistant foam to extinguish.

Storage

Store in a well-ventilated place. Keep cool Store locked up.

Disposal

Dispose of contents and container in accordance with applicable regional, national and local laws and regulations.

2.3 Other hazards

Not applicable.

Ingredient(s) with unknown acute toxicity

100% of this product mixture consists of ingredient(s) of unknown acute toxicity. This material is considered hazardous by the OSHA Hazard Communication Standard, (29 CFR 1910.1200). This material is considered hazardous by the Hazardous Products Regulations.