Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
General Information
Product name
ShieldPatchTM X1 Part A
1.2.1 Relevant identified uses
A high build solventless coating when used with Part B component
supplier name
ShieldCrete International
Icons in SDS
Company Information
company name
ShieldCrete International Sdn Bhd
e-mail address of the competent person responsible for the Safety Data Sheet
info@shieldcreteinternational.com
Hazard Codes
Hazard statements (CLP)
H317, H334, H370, H372
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Hazard statements
Classified as hazardous according to criteria in the Hazardous Substances (Minimum Degrees of Hazard) Regulations 2001
HSNO Classifications
6.5A, 6.5B, 6.9A HSNO Approval Number HSR002670 HAZARD AND PRECAUTIONARY STATEMENTS May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic reaction. Causes damage to organs. Causes damage to organs through prolonged or repeated exposure.
Prevention
Read Safety Data Sheet before use. Avoid breathing dust/fume/gas/mist/vapors/spray. In case of inadequate ventilation wear respiratory protection. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product.
Response
If exposed, call a Poison Centre or doctor/physician. Specific treatment – see first aid instruction on this label. Get medical advice/attention if you feel unwell. If Inhaled – If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms, call a poison center or doctor/physician. If on Skin – Wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice/attention. Use a cleansing agent on skin. Wash contaminated clothing before reuse. In Case of Fire Use carbon dioxide, dry chemical, foam. For large scale fires, alcohol resistant foams are preferred if available. General purpose synthetic foams or protein foams may function, but much less effectively. Water may be used as a blanket for fire extinguishment. If water is used, it should be used in very large quantities. The reaction between water and isocyanate may be vigorous. If possible, contain fire run off water.
Storage
Store locked up.
Disposal
Recycle wherever possible. Bury residue in an authorized landfill. Recycle containers if possible. If not possible, dispose of in an authorized landfill. Containers may still present a chemical hazard/danger when empty. If container cannot be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used to store the same product, then puncture containers, to prevent re-use and bury at an authorized landfill. Contact appropriate Waste Management Company for guidance and disposal options in your area. Where possible retain label warnings and MSDS and observe all notices pertaining to the product. SECTION 3: COMPOSITES / INFORMATION ON INGREDIENTS
2.1 Classification of the substance or mixture
6.5A, 6.5B, 6.9A HSNO Approval Number: HSR002670
