Note: Ingredients listed on restricted chemical lists
EC/CAS
811-97-2
Name of the chemical
1,1,1,2-Tetrafluoroethane
Concentration
35%-45%
EC/CAS
79-01-6
Name of the chemical
Trichloroethylene
Concentration
50%-60%
General Information
Revision date
2015-05-08
Product name
SPL-88 - Handler Mfg. Co., Inc
1.2.1 Relevant identified uses
SPL-88 is chemically bonded in a patented process to produce an extemely effective dry spray that is ideal for separating, protecting and/or lubricating
1.2.2. Uses advised against
Avoid over spraying - a light coating insures optimum results
Icons in SDS
Company Information
company name
Shield Packaging Co., Inc
e-mail address of the competent person responsible for the Safety Data Sheet
rfellows@shieldpackaging.com
GHS Information
Signal word
Danger
Section 2
2.1 Classification of the substance or mixture
EYE DAMAGE/IRRITATION - Category 2B SENSITIZATION - RESPIRATORY - Category 1 SKIN CORROSION/IRRITATION - Category 3 SPECIFIC TARGET ORGAN TOXICITY (Repeated - Category 2 SPECIFIC TARGET ORGAN TOXICITY (Single E - Category 2
Signal word
Danger
Hazard statements
Causes eye irritation Causes mild skin irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause damage to organs (or state all organs affected if known) (state route of exposure if no other routes of 0exposure cause the hazard) May cause damage to organs (state all organs affected, if known) through prolonged or repeated exposure (state route of exposure if no other routes of exposure cause the hazard)
Response
Get medical advice/attention if you feel unwell. If experiencing respiratory symptoms: Call a poison center/doctor. If exposed or concerned: Call a poison center/doctor. If eye irritation persists: Get medical advice/attention. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If skin irritation occurs: Get medical advice/attention.
Prevention
In case of inadequate ventilation] wear respiratory protection. Avoid breathing dust, fume, gas, mist, vapors and/or spray. Do not breathe dust, fume, gas, mist, vapors and/or spray. Do not eat, drink or smoke when using this product. Wash hands before breaks and immediately after handling the product.
Storage
Store locked up.
Disposal
Dispose of contents/container to licensed waste disposal contractor. Ingredients of unknown 0% toxicity
2.3 Other hazards
Color: Clear Form: Aerosol spray Odor: Irritating odor at high concentrations.
Potential health effects
General: May irritate skin, eyes, nose and throat. Giddiness/dizziness/loss of coordination. May produce irregular heart beat (Arrhythmia) at high vapor concentrations. Irritation to the upper respiratory tract. Inhalation: (Acute and Chronic): Overexposure may cause irritation to the upper respiratory tract. Giddiness/dizziness/loss of coordination with excessive vapor concentration. May produce irregular heart beat (Arrhythmia) at high vapor concentrations. Chronic overexposure may cause deterioration, dermatitis, and have liver and kidney effects. Skin: May irritate skin. Eye: May irritate eyes, nose and throat. Ingestion: Not likely to be ingested in acutely toxic quantities.
Principle Routes of Exposure
Skin contact. Inhalation. Ingestion (Not likely to be ingested in acutely toxic quantities). Target Organs: Central nervous system and/or Respiratory system.
Medical Conditions Generally Aggravated by Exposure
May aggravate upper respiratory or dermal dysfunction in people with pre-existing conditions. May increase myocardial irritation in people with pre-existing condition.
Environmental hazards
The product components are not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. HEALTH HAZARD NOTE: This product contains a material that when burned produces a vapor capable of inducing flu like symptoms (polymer fume fever). The onset of symptoms occur within 24 hours of exposure and may last for two to three days. Avoid contamination of tobacco product. INHALATION HAZARD The willful concentration and inhalation of vapors from this product are hazardous NOTE: and may be fatal. *Components marked by an asterix are present above the De minimus cut of level and subject to the reporting requirements is Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR part 372. Section 3. Ingredients CAS Ingredient Name Weight % 811-97-2 1,1,1,2-Tetrafluoroethane 35% - 45% 79-01-6 Trichloroethylene* 50% - 60% Occupational exposure limits, if available, are listed in Section 8.