Note: Ingredients listed on restricted chemical lists
EC/CAS
205-500-4/141-78-6
Name of the chemical
acetic acid, ethyl ester
Concentration
≥10 - ≤25
EC/CAS
204-658-1/123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
≤10
EC/CAS
203-625-9/108-88-3
Name of the chemical
Toluene
Concentration
≤10 ≤5
EC/CAS
212-782-2/868-77-9
Name of the chemical
2-hydroxyethyl methacrylate
Concentration
≤3
EC/CAS
423-340-5/162881-26-7
Name of the chemical
Phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide
Concentration
<1
EC/CAS
203-550-1/108-10-1
Name of the chemical
4-methylpentan-2-one; isobutyl methyl ketone (MIBK)
Concentration
≤0.3
EC/CAS
201-297-1/80-62-6
Name of the chemical
methacrylic acid, methyl ester
Concentration
≤0.1
EC/CAS
203-571-6/108-31-6
Name of the chemical
maleic anhydride
Concentration
≥0.001%
General Information
Version
19.03
Revision date
2023-01-17
Product name
TOPCOAT BY SPRAY UV - HIGH GLOSS WHITE
Emergency telephone
+359 2 9154 233, +39 051 770511
Icons in SDS
Company Information
company name
SHERWIN-WILLIAMS Italy S.r.l
e-mail address of the competent person responsible for the Safety Data Sheet
regulatory.SWI@sherwin.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H315, H317, H318, H336, H361d, H412
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
1272/2008]
Product definition
Mixture
Signal word
Danger
Hazard statements
Highly flammable liquid and vapor. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. May cause drowsiness or dizziness. Suspected of damaging the unborn child. Harmful to aquatic life with long lasting effects.
Prevention
Obtain special instructions before use. Wear protective gloves, protective clothing, eye protection, face protection, or hearing protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment.
Response
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Storage
Not applicable.
Disposal
Not applicable.
Hazardous Ingredients
Ethyl Acetate Dipropylene Glycol Diacrylate n-Butyl Acetate Trimethylolpropane Ethoxylate Triacrylate Toluene 2-Hydroxyethyl Methacrylate 1,6-Hexanediol diacrylate Phenylbis(trimethylbenzoyl)phosphine oxide 2-Propenoic acid, reaction products with pentaerythritol Methyl Methacrylate Maleic Anhydride
Supplemental label elements
Warning! Hazardous respirable droplets may be formed when sprayed. Do not elements breathe spray or mist. FOR INDUSTRIAL USE ONLY
Special packaging requirements
Not applicable.
2.3 Other hazards
This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
Other hazards which do not result in classification
None known.
