Tetramer

Hazard statements (CLP)

H226, H304, H316, H400, H410

Code

Statements

H226

Flammable liquid and vapour

2.1 Classification of the substance or mixture

Flammable liquids, Category 3 Aspiration hazard, Category 1 Skin corrosion/irritation, Category 3 Acute hazards to the aquatic environment, Category 1 Hazardous to the aquatic environment - Long-term Hazard, Category 1

Signal word

Danger

Hazard statements

H226: Flammable liquid and vapour.

Health hazards

H304: May be fatal if swallowed and enters airways. H316: Causes mild skin irritation.

Environmental hazards

H400: Very toxic to aquatic life. H410: Very toxic to aquatic life with long lasting effects.

Prevention

P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P233: Keep container tightly closed. P240: Ground/bond container and receiving equipment. P241: Use explosion-proof electrical/ventilating/lighting equipment. P242: Use only non-sparking tools. P243: Take precautionary measures against static discharge. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.

Response

P301+P310 IF SWALLOWED Immediately call a POISON CENTER or doctor/physician. P331: Do NOT induce vomiting. P303+P361+P353 IF ON SKIN (or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P332+P313 If skin irritation occurs Get medical advice/attention. P370+P378 In case of fire Use appropriate media for extinction. P391: Collect spillage.

Storage

P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up.

Disposal

P501: Dispose of contents and container to appropriate waste site or reclaimer in accordance with local and national regulations.

Other hazards which do not result in classification

Repeated exposure may cause skin dryness or cracking. Vapours are heavier than air. Vapours may travel across the ground and reach remote ignition sources causing a flashback fire danger. Will float and can be reignited on surface water. This material is a static accumulator. Even with proper grounding and bonding, this material can still accumulate an electrostatic charge. If sufficient charge is allowed to accumulate, electrostatic discharge and ignition of flammable air-vapour mixtures can occur.