General Information
Revision date
2019-08-10
Product name
Diisobutyl Ketone
Product Synonyms
DIBK
CAS No.
108-83-8
REACH No
01-2119474441-41-0001
1.2.1 Relevant identified uses
Use only in industrial processes
Icons in SDS
Company Information
company name
Shell (Switzerland)
e-mail address of the competent person responsible for the Safety Data Sheet
sccmsds@shell.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H335
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
CLP CLASSIFICATION
Flammable liquids, Category 3 H226: Flammable liquid and vapour. Specific target organ toxicity - single H335: May cause respiratory irritation. exposure, Category 3, Respiratory Tract
2.2 Label elements
REGULATION (EC) No 1272/2008)
Signal word
Warning
Physical hazards
H226 Flammable liquid and vapour.
Health hazards
H335 May cause respiratory irritation.
Environmental hazards
Not classified as environmental hazard according to CLP criteria.
Supplemental label elements
EUH066 Repeated exposure may cause skin
Hazard statements
dryness or cracking.
Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
Response
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Storage
P403 + P235 Store in a well-ventilated place. Keep cool.
Disposal
P501 Dispose of contents and container to appropriate waste site or reclaimer in accordance with local and national regulations.
2.3 Other hazards
The substance does not fulfill all screening criteria for persistence, bioaccumulation and toxicity and hence is not considered to be PBT or vPvB. Vapours are heavier than air. Vapours may travel across the ground and reach remote ignition sources causing a flashback fire danger. May form flammable/explosive vapour-air mixture. Risk of explosion if heated under confinement. Even with proper grounding and bonding, this material can still accumulate an electrostatic charge. If sufficient charge is allowed to accumulate, electrostatic discharge and ignition of flammable air- vapour mixtures can occur.
