Note: Ingredients listed on restricted chemical lists
EC/CAS
68527-23-1
Name of the chemical
Naphtha (petroleum), light steam-cracked arom
Concentration
<= 100
EC/CAS
203-625-9/108-88-3
Name of the chemical
Toluene
Concentration
>= 20 - <= 25
EC/CAS
200-753-7/71-43-2
Name of the chemical
Benzol
Concentration
>= 0.03 - <= 0.1
EC/CAS
202-849-4/100-41-4
Name of the chemical
Ethylbenzene
Concentration
>= 10 - <= 15
EC/CAS
202-049-5/91-20-3
Name of the chemical
Naphthalene,3
Concentration
>= 1 - <= 3
General Information
Revision date
2018-06-05
Product name
C7+ Blend Stock
CAS No.
68527-23-1
Icons in SDS
Company Information
company name
Shell Chemical LP
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H304, H315, H336, H340, H350, H361, H373, H411
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
OSHA HCS Classification
Flammable liquids Category 2 Skin irritation Category 2
Aspiration hazard
Category 1 Germ cell mutagenicity Category 1B Carcinogenicity Category 1A Reproductive toxicity Category 2 Specific target organ toxicity Category 3 (Narcotic effects.) - single exposure Specific target organ toxicity Category 2 (Blood, Blood-forming organs., Peripheral nervous - repeated exposure system, Auditory system, Immune system, Respiratory system, Visual system, Central nervous system) Chronic aquatic toxicity Category 2
Signal word
Danger
Physical hazards
H225 Highly flammable liquid and vapour.
Health hazards
H315 Causes skin irritation. H304 May be fatal if swallowed and enters airways. H340 May cause genetic defects. H350 May cause cancer. H361 Suspected of damaging fertility or the unborn child. H336 May cause drowsiness or dizziness. H373 May cause damage to organs (Blood, Peripheral nervous system, Auditory system, Immune system, Respiratory system, Central nervous system, Blood forming organs, Visual system) through prolonged or repeated exposure.
Environmental hazards
H411 Toxic to aquatic life with long lasting effects.
Prevention
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from open flames/hot surfaces. - No smoking. P233 Keep container tightly closed. P240 Ground/bond container and receiving equipment. P241 Use explosion-proof electrical/ ventilating/ lighting equip- ment. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P264 Wash hands thoroughly after handling. P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment.
Response
P370+P378 In case of fire: Use appropriate media for extinction. P303 + P361 + P353 IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. P332 + P313 If skin irritation occurs: Get medical advice/ atten- tion. P362 Take off contaminated clothing and wash before reuse. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor. P331 Do NOT induce vomiting. P308 + P313 IF exposed or concerned: Get medical advice/ attention. P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P312 Call a POISON CENTER/doctor if you feel unwell. P314 Get medical advice/ attention if you feel unwell. P391 Collect spillage.
Storage
P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P235 Keep cool. P405 Store locked up.
Disposal
P501 Dispose of contents and container to appropriate waste site or reclaimer in accordance with local and national regula- tions.
Other hazards which do not result in classification
In use, may form flammable/explosive vapour-air mixture. This material is a static accumulator. Even with proper grounding and bonding, this material can still accumulate an electrostatic charge. If sufficient charge is allowed to accumulate, electrostatic discharge and ignition of flammable air- vapour mixtures can occur. The classification of this material is based on OSHA HCS 2012 criteria.