Note: Ingredients listed on restricted chemical lists
EC/CAS
215-138-9/1305-78-8
Name of the chemical
Calcium oxide
Concentration
2.5-5%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.25-0.49%
General Information
Revision date
2022-03-28
Product name
SHAW 35MC PREMIUM PLUS
1.2.1 Relevant identified uses
Adhesive
Emergency telephone
1(800) 424-9300 / 1, (703) 527-3887
Icons in SDS
Company Information
company name
Shaw Industries
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H319, H334
Hazard statements
Code
Statements
H319
Causes serious eye irritation
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Eye Irrit. 2A Causes serious eye irritation. Resp. Sens. 1 May cause allergy or asthma symptoms or breathing difficulties if inhaled
2.2 Label elements
Pictograms and Signal Words Danger
Hazard statements
H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing vapours. P264 Wash skin thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. P284 [In case of inadequate ventilation] wear respiratory protection. P304+P341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P342+P311 If experiencing respiratory symptoms: Call a doctor. P405 Store locked up. P501 Dispose of contents/container in accordance with applicable regulations.
Ingredient(s) with unknown acute toxicity
None Hazards not otherwise classified identified during the classification process None This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard)
