Note: Ingredients listed on restricted chemical lists
EC/CAS
618-498-9/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
<20%
EC/CAS
215-138-9/1305-78-8
Name of the chemical
Calcium oxide
Concentration
<3%
EC/CAS
247-714-0/26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
<5%
General Information
Revision date
2022-03-02
Product name
TYTAN PROFESSIONAL PU FIX Klej montażowy
Icons in SDS
Company Information
company name
Selena S.A
e-mail address of the competent person responsible for the Safety Data Sheet
kontakt@selena.com, msds@selena.pl
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Hazard pictograms
GHS07 GHS08
Signal word
Danger
Hazardous Ingredients
diphenylmethanediisocyanate, isomers and homologues methylenediphenyl diisocyanate
Hazard statements
H332 Harmful if inhaled. H315 Causes skin irritation. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H351 Suspected of causing cancer. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P285 In case of inadequate ventilation wear respiratory protection. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Additional information
As from 24 August 2023 adequate training is required before industrial or professional use. Further information at: www.feica.eu/PUinfo Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. EUH204 Contains isocyanates. May produce an allergic reaction.
PBT Substances
Not applicable
vPvB Substances
Not applicable · Determination of endocrine-disrupting properties CAS: 1244733-77-4 tris(2-chloro-1-methylethyl)phosphate List II *
2.1 Classification of the substance or mixture
· Classification according to Regulation (EC) No 1272/2008 GHS08 health hazard Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. Carc. 2 H351 Suspected of causing cancer. STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure. GHS07 Acute Tox. 4 H332 Harmful if inhaled. Skin Irrit. 2 H315 Causes skin irritation. Eye Irrit. 2 H319 Causes serious eye irritation. Skin Sens. 1 H317 May cause an allergic skin reaction. STOT SE 3 H335 May cause respiratory irritation.