Note: Ingredients listed on restricted chemical lists
EC/CAS
265-150-3/64742-48-9
Name of the chemical
Naphtha (petroleum), hydrotreated heavy
Concentration
10-30% 5-10%
EC/CAS
203-448-7/106-97-8
Name of the chemical
n-Butan, enthält 0,1% Butadien
Concentration
1-5%
EC/CAS
611-341-5/55965-84-9
Name of the chemical
Mixture of 5-chloro-2-methyl-2H- isothiazol-3-one (EINECS 247-500-7) and 2-methyl-2H-isothiazol-3-one (EINECS 220-239-6)
Concentration
N/A
EC/CAS
220-239-6
Name of the chemical
Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one 2-Methyl-2H-isothiazol-3-one
Concentration
<1%
General Information
Revision date
2015-09-01
Product name
STAINLESS STEEL POLISH
1.2.1 Relevant identified uses
Stainless Steel cleaner
supplier name
SELDEN RESEARCH LIMITED
Manufacturer Name
SELDEN RESEARCH LIMITED
Icons in SDS
Company Information
company name
SELDEN RESEARCH LIMITED
e-mail address of the competent person responsible for the Safety Data Sheet
safety@selden.co.uk
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
Physical hazards
Aerosol 1 - H222, H229
Health hazards
Elicitation - EUH208
Environmental hazards
Not Classified
2.1 Classification of the substance or mixture
67/548/EEC or 1999/45/EC) F+;R12.
Signal word
Danger
Hazard statements
H222 Extremely flammable aerosol. H229 Pressurised container: may burst if heated EUH208 Contains METHYL-2H or METHYL-4 (3:1) Mixture of EC NO 220-239-6. May produce an allergic reaction.
Precautionary statements
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P261 Avoid breathing vapour/spray. P271 Use only outdoors or in a well-ventilated area. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. P102 Keep out of reach of children.
2.3 Other hazards
PRESSURISED CONTAINER - increase in temperature to greater than 50C will cause internal pressure to rise potentially causing bursting/explosion.
