HYDROGEN PEROXIDE 34.5% (ALL GRADES)

Seeler Industries, Inc

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS03 GHS05 GHS07
Health risk rating 3
Safety risk rating 4
Environmental risk rating 3

Note: Ingredients listed on restricted chemical lists

EC/CAS

7722-84-1

Name of the chemical

Hydrogen peroxide

Concentration

34.5%

EC/CAS

7732-18-5

Name of the chemical

Water, distilled, conductivity or of similar purity H2O

Concentration

65.5%

General Information

Product name

HYDROGEN PEROXIDE 34.5% (ALL GRADES)

Product Synonyms

H2O2 34.5%

Chemical name

peroxides

1.2.1 Relevant identified uses

Bleaching agent, Oxidizing agent, Cosmetics, Water treatment

Emergency telephone

(800) 424-9300

Icons in SDS

GHS03 GHS05 GHS07 M004 M008 M009 M010 M011 M013 M017

Company Information

company name

Seeler Industries, Inc

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H272, H302, H318, H335, H412

Hazard statements

Code

Statements

H272

May intensify fire; oxidiser

Section 2

SECTION 2: Hazards identification

Emergency Overview Color: colourless Physical state: liquid Odor: pungent Classification of the substance or mixture Oxidizing liquids, Category 2, H272 Oral: Acute toxicity, Category 4, H302 Serious eye damage, Category 1, H318 Specific target organ toxicity - single exposure, Category 3, H335 Chronic aquatic toxicity, Category 3, H412 For the full text of the H-Statements mentioned in this Section, see Section 16 Release Date: 5/11/15

Signal word

Danger

Hazard statements

H272 May intensify fire; oxidiser. H302 Harmful if swallowed. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects.

Prevention

P210 Keep away from heat. P220 Keep/Store away from clothing/ combustible materials. P221 Take any precaution to avoid mixing with combustibles. P261 Avoid breathing gas/mist/vapours/spray. P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. P280 Wear protective gloves/ eye protection/ face protection.

Response

P301 + P312 IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell. P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER or doctor/ physician. P330 Rinse mouth. P370 + P378 In case of fire: Use dry sand, dry chemical or alcohol-resistant foam for extinction.

Storage

P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.

Disposal

P501 Dispose of contents/ container to an approved waste disposal plant.

Potential health effects

If swallowed: May cause: gastrointestinal symptoms, ulceration, burns, accumulation of fluid in the lungs which may be delayed for several hours.(severity of effects depends on extent of exposure) .

2.1 Classification of the substance or mixture

Oxidizing liquids, Category 2, H272 Oral: Acute toxicity, Category 4, H302 Serious eye damage, Category 1, H318 Specific target organ toxicity - single exposure, Category 3, H335 Chronic aquatic toxicity, Category 3, H412 *For the full text of the H-Statements mentioned in this Section, see Section 16. Release Date: 5/11/15 GHS-Labelling Hazard pictograms: Signal word: Danger Hazard statements: H272 : May intensify fire; oxidiser. H302 : Harmful if swallowed. H318 : Causes serious eye damage. H335 : May cause respiratory irritation. H412 : Harmful to aquatic life with long lasting effects. Precautionary statements: Prevention: P210 : Keep away from heat. P220 : Keep/Store away from clothing/ combustible materials. P221 : Take any precaution to avoid mixing with combustibles. P261 : Avoid breathing gas/mist/vapours/spray. P264 : Wash skin thoroughly after handling. P270 : Do not eat, drink or smoke when using this product. P271 : Use only outdoors or in a well-ventilated area. P273 : Avoid release to the environment. P280 : Wear protective gloves/ eye protection/ face protection. Response: P301 + P312 : IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell. P304 + P340 : IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 : Immediately call a POISON CENTER or doctor/ physician. P330 : Rinse mouth. P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam for extinction. Storage: P403 + P233 : Store in a well-ventilated place. Keep container tightly closed. P405 : Store locked up. Disposal: P501 : Dispose of contents/ container to an approved waste disposal plant. Supplemental information: Potential Health Effects: If swallowed: May cause: gastrointestinal symptoms, ulceration, burns, accumulation of fluid in the lungs which may be delayed for several hours.(severity of effects depends on extent of exposure) . 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name CAS-No. Wt/Wt GHS Classification** Hydrogen peroxide (H2O2) 7722-84-1 34.5 % H272, H302, H318, H335, H412 Water 7732-18-5 65.5 % Not classified **For the full text of the H-Statements mentioned in this Section, see Section 16. 4. FIRST AID MEASURES Inhalation: If inhaled, remove victim to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Skin: In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately. Ingestion: If swallowed, DO NOT induce vomiting unless directed to do so by medical personnel. Get medical attention immediately. If victim is fully conscious, give a cupful of water. Never give anything by mouth to an unconscious person. Rinse mouth. Notes to physician: Exposure to material may cause delayed lung injury resulting in pulmonary edema and pneumonitis. Exposed individuals should be monitored for 72 hours after exposure for the onset of delayed respiratory symptoms. 5. FIREFIGHTING MEASURES Extinguishing media (suitable): water spray, water fog Protective equipment: Fire fighters and others who may be exposed to products of combustion should wear full fire fighting turn out gear (full Bunker Gear) and self-contained breathing apparatus (pressure demand / NIOSH approved or equivalent). Further firefighting advice: Oxidizing material In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion. Decomposition will release oxygen, which will intensify a fire. Cool closed containers exposed to fire with water spray. Closed containers of this material may explode when subjected to heat from surrounding fire. Do not allow run-off from fire fighting to enter drains or water courses. Fire fighting equipment should be thoroughly decontaminated after use. Fire and explosion hazards: Explosive when mixed with combustible material. Avoid breathing fumes from fire exposed material. 6. ACCIDENTAL RELEASE MEASURES In case of spill or leak: Prevent further leakage or spillage if you can do so without risk. Evacuate area of all unnecessary personnel. Ventilate the area. Eliminate all ignition sources. Avoid generation of vapors. Avoid contact with cellulose, paper, sawdust or similar substances. Risk of self-ignition or promotion of fires. Combustible materials exposed to hydrogen peroxide should be rinsed immediately with large amounts of water to ensure that all the hydrogen peroxide is removed. Contain and collect spillage with non-combustible absorbent material such as clean sand, earth, diatomaceous earth or non-acidic clay and place into suitable properly labeled containers for prompt disposal. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Consult a regulatory specialist to determine appropriate state or local reporting requirements, for assistance in waste characterization and/or hazardous waste disposal and other requirements listed in pertinent environmental permits. 7. HANDLING AND STORAGE Handling General information on handling: Do not taste or swallow. Do not get in eyes, on skin, or on clothing. Avoid breathing vapor or mist. Keep from contact with clothing and other combustible materials. Keep away from heat, sparks and flames. Use only with adequate ventilation. Wash thoroughly after handling. Wear fire/ flame resistant/ retardant clothing. Prevent product contamination. Keep only in the original container. Store in tightly closed container. DO NOT CUT, DRILL, GRIND, OR WELD ON OR NEAR THIS CONTAINER. Emptied container retains vapor and product residue. Observe all labeled safeguards until container is cleaned, reconditioned or destroyed. Avoid contamination. Storage General information on storage conditions: Store in tightly closed container. Store in cool, dry, well ventilated area away from sources of ignition such as flame, sparks and static electricity. Store out of direct sunlight in a cool well-ventilated place. Store in original container. Store away from combustibles and incompatible materials. Refer to National Fire Protection Association (NFPA) 430, Code for the Storage of Solid and Liquid Oxidizers. Storage incompatibility – General: Store separate from acids, alkalies, reducing agents, and combustibles. Store separate from: Organic materials Metallic oxides 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Airborne Exposure Guidelines: HYDROGEN PEROXIDE (7722-84-1) US. ACGIH Threshold Limit Values Time weighted average 1 ppm US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) PEL: 1 ppm (1.4 mg/m3) Only those components with exposure limits are printed in this section. Limits with skin contact designation above have skin contact effect. Air sampling alone is insufficient to accurately quantitate exposure. Measures to prevent significant cutaneous absorption may be required. Limits with a sensitizer designation above mean that exposure to this material may cause allergic reactions. Engineering controls: Investigate engineering techniques to reduce exposures below airborne exposure limits or to otherwise reduce exposures. Provide ventilation if necessary to minimize exposures or to control exposure levels to below airborne exposure limits (if applicable see above).If practical, use local mechanical exhaust ventilation at sources of air contamination such as open process equipment. Consult ACGIH ventilation manual or NFPA Standard 91 for design of exhaust systems. Respiratory protection: Avoid breathing vapor or mist. Where airborne exposure is likely or airborne exposure limits are exceeded (if applicable, see above), use NIOSH approved respiratory protection equipment appropriate to the material and/or its components. Full facepiece equipment is recommended and, if used, replaces need for face shield and/or chemical goggles. Consult respirator manufacturer to determine appropriate type equipment for a given application. Observe respirator use limitations specified by NIOSH or the manufacturer. For emergency and other conditions where there may be a potential for significant exposure or where exposure limit may be significantly exceeded, use an approved full face positive-pressure, self-contained breathing apparatus or positive-pressure airline with auxiliary self-contained air supply. Respiratory protection programs must comply with 29 CFR § 1910.134. Skin protection: Wear appropriate chemical resistant protective clothing and chemical resistant gloves to prevent skin contact. When handling this material, gloves of the following type(s) should be worn: Neoprene Polyvinylchloride Impervious butyl rubber gloves Wear a face shield, chemical goggles and chemical resistant clothing such as an approved splash protective suit made of SBR Rubber, PVC, Gore-Tex or a HAZMAT Splash Protective Suit (Level A, B, or C) when splashing may occur (such as connecting/disconnecting, mechanical first break). For foot protection, wear boots made of NBR, PVC, polyurethane, or neoprene. Overboots made of Latex or PVC, as well as firefighter boots or specialized HAZMAT boots are also permitted. DO NOT wear any form of boot or overboots made of nylon or nylon blends. DO NOT use cotton, wool or leather, as these materials react RAPIDLY with higher concentrations of hydrogen peroxide. Rinse immediately if skin is contaminated. Remove contaminated clothing and shoes immediately. Thoroughly rinse the outside of gloves and protective clothing with water prior to removal. Completely submerge hydrogen peroxide contaminated clothing or other materials in water prior to drying. Residual hydrogen peroxide, if allowed to dry on materials such as paper, fabrics, cotton, leather, wood or other combustibles can cause the material to ignite and result in a fire. Clean protective equipment before reuse. Provide a safety shower at any location where skin contact can occur. Wash thoroughly after handling. Eye protection: Where there is potential for eye contact, wear a face shield, chemical goggles, and have eye flushing equipment immediately available. 9. PHYSICAL AND CHEMICAL PROPERTIES Color: colourless Physical state: liquid Odor: pungent Odor threshold: No data available Flash point None. Auto-ignition Not applicable temperature: Lower flammable limit Not applicable (LFL): Upper flammable limit Not applicable (UFL): pH: No data available Density: 1.13 g/cm3 (68 °F (20 °C)) Vapor pressure: 24 mmHg (68 °F (20 °C)) Relative vapor density: 1.0 Vapor density: not determined Boiling point/boiling 226 °F (108 °C) range: Freezing point: -27 °F (-33 °C) Evaporation rate: No data available Solubility in water: completely soluble % Volatiles: 100 % Molecular weight: 34.01 g/mol Oil/water partition No data available coefficient: Thermal decomposition No data available Flammability: See GHS Classification in Section 2 10. STABILITY AND REACTIVITY Stability: This material is chemically stable under normal and anticipated storage, handling and processing conditions. Materials to avoid: Metals Organic materials Reducing agents Metallic oxides Dusts Combustible materials (e.g., wood, sawdust) Alkaline materials Conditions / hazards to avoid: Material decomposes with the potential to produce a rupture of unvented closed containers. Hazardous decomposition products: This material decomposes if contaminated, causing fire and possible explosions. Oxygen can be liberated at temperatures above ambient. 11. TOXICOLOGICAL INFORMATION Data on this material and/or a similar material are summarized below. Data for HYDROGEN PEROXIDE 34.5% (ALL GRADES) Acute toxicity Oral: Harmful if swallowed. (Rat) LD50 = 1,200 mg/kg. (35 %) (as aqueous solution) Dermal: May be harmful in contact with skin. (Rabbit) LD50 > 2,000 mg/kg. (35 %) (as aqueous solution) May be harmful in contact with skin. (Rat) LD50 > 2,000 mg/kg. (35 %) as aqueous solution Inhalation: No deaths occurred. (Rat) 4 h LC0 > 0.17 mg/l. (50 %) (saturated vapor) Skin Irritation: Causes mild skin irritation. (Rabbit) Irritation Index: 1.6 / 8. (35 %) (aqueous solution) Eye Irritation: Causes serious eye damage. (Rabbit) (35 %) (aqueous solution) Data for HYDROGEN PEROXIDE (7722-84-1) Acute toxicity Specific target organ toxicity - single exposure: May cause respiratory irritation. Repeated dose toxicity Repeated drinking water administration to rat and mouse / affected organ(s): Gastro-intestinal tract / signs: irritation Repeated inhalation administration to Rat / affected organ(s): nose / signs: irritation Carcinogenicity Chronic drinking water administration to rat and mouse / affected organ(s): Gastro-intestinal tract / signs: Increased incidence of tumors was reported. Classified by the International Agency for Research on Cancer as: Group 3: Unclassifiable as to carcinogenicity in humans. Genotoxicity Assessment in Vitro: Genetic changes were observed in laboratory tests using: bacteria, animal cells Genotoxicity Assessment in Vivo: Genetic changes were observed in a laboratory test using: mice, rats Human experience Inhalation: Throat: irritation. (based on reports of occupational exposure to workers) Human experience Skin contact: Skin: bleaching of hair. (based on reports of occupational exposure to workers) Human experience Eye contact: Eye: irritating. (based on reports of occupational exposure to workers) Human experience Ingestion: Gastrointestinal tract: bloating, ulceration, burns. (accidental exposure to concentrated solutions) Lung: accumulation of fluid in the lungs, death. (severity of effects depends on extent of exposure) 12. ECOLOGICAL INFORMATION Chemical Fate and Pathway Data on this material and/or a similar material are summarized below. Data for HYDROGEN PEROXIDE (7722-84-1) Biodegradation: Readily biodegradable. (0.02 d) biodegradation 99 % Octanol Water Partition Coefficient: log Pow = -1.57 (calculated) Ecotoxicology Data on this material and/or a similar material are summarized below. Data for HYDROGEN PEROXIDE (7722-84-1) Aquatic toxicity data: Harmful. Pimephales promelas (fathead minnow) 96 h LC50 = 16.4 mg/l Aquatic invertebrates: Toxic. Daphnia pulex (Water flea) 48 h EC50 = 2.4 mg/l Algae: Toxic. Skeletonema costatum 72 h ErC50 = 1.38 mg/l Microorganisms: Activated sludge 0.5 h EC50 = 466 mg/l Activated sludge 3 h EC50 > 1,000 mg/l Chronic toxicity to aquatic invertebrates: Harmful. Daphnia magna (Water flea) 21 d NOEC (reproduction) = 0.63 mg/l 13. DISPOSAL CONSIDERATIONS Waste disposal: Dilution with water is the preferred method of disposal. Dispose of in accordance with federal, state and local regulations. Consult a regulatory specialist to determine appropriate state or local reporting requirements, for assistance in waste characterization and/or hazardous waste disposal and other requirements listed in pertinent environmental permits. Note: Chemical additions to, processing of, or otherwise altering this material may make this waste management information incomplete, inaccurate, or otherwise inappropriate. Furthermore, state and local waste disposal requirements may be more restrictive or otherwise different from federal laws and regulations. Take appropriate measures to prevent release to the environment. 14. TRANSPORT INFORMATION US Department of Transportation (DOT) UN Number : 2014 Proper shipping name : Hydrogen peroxide, aqueous solutions Class : 5.1 Subsidiary hazard class : (8) Packaging group : II Marine pollutant : no International Maritime Dangerous Goods Code (IMDG) UN Number : 2014 Proper shipping name : HYDROGEN PEROXIDE, AQUEOUS SOLUTION Class : 5.1 Subsidiary hazard class : (8) Packaging group : II Marine pollutant : no 15. REGULATORY INFORMATION Chemical Inventory Status EU. EINECS EINECS Conforms to US. Toxic Substances Control Act TSCA The components of this product are all on the TSCA Inventory. Australia. Industrial Chemical (Notification and AICS Conforms to Assessment) Act Canada. Canadian Environmental Protection Act DSL All components of this product are on the (CEPA). Domestic Substances List (DSL) Canadian DSL. Japan. Kashin-Hou Law List ENCS (JP) Does not conform Korea. Existing Chemicals Inventory (KECI) KECI (KR) Conforms to Philippines. The Toxic Substances and Hazardous PICCS (PH) Does not conform and Nuclear Waste Control Act China. Inventory of Existing Chemical Substances IECSC (CN) Does not conform United States – Federal Regulations SARA Title III – Section 302 Extremely Hazardous Chemicals: Chemical Name CAS-No. SARA Reportable Threshold Quantities Planning Quantity HYDROGEN PEROXIDE 7722-84-1 1000 lbs SARA Title III - Section 311/312 Hazard Categories: Acute Health Hazard, Fire Hazard, Reactivity Hazard SARA Title III – Section 313 Toxic Chemicals: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) - Reportable Quantity (RQ): The components in this product are either not CERCLA regulated, regulated but present in negligible concentrations, or regulated with no assigned reportable quantity. United States – State Regulations New Jersey Right to Know Chemical Name CAS-No. HYDROGEN PEROXIDE 7722-84-1 New Jersey Right to Know – Special Health Hazard Substance(s) Chemical Name CAS-No. HYDROGEN PEROXIDE 7722-84-1 Pennsylvania Right to Know Chemical Name CAS-No. HYDROGEN PEROXIDE 7722-84-1 Water 7732-18-5 Pennsylvania Right to Know – Environmentally Hazardous Substance(s) Chemical Name CAS-No. HYDROGEN PEROXIDE 7722-84-1 California Prop. 65 This product does not contain any chemicals known to the State of California to cause cancer, birth defects, or any other reproductive defects. 16. OTHER INFORMATION Full text of H-Statements referred to under sections 2 and 3. H272 May intensify fire; oxidiser. H302 Harmful if swallowed. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. Miscellaneous: Other information: Seeler Industries Inc. believes that the information and recommendations contained herein (including data and statements) are accurate as of the date hereof. NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY, OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, IS MADE CONCERNING THE INFORMATION PROVIDED HEREIN. The information provided herein relates only to the specific product designated and may not be valid where such product is used in combination with any other materials or in any process. Further, since the conditions and methods of use are beyond the control of Seeler Industries, Inc., Seeler Industries, Inc. expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such information. Appendix C Notice Intent to Discharge Permit GHD | Phillips 66 Company | 11226568 | Cool-Ox® Work Plan 2022 10 This document is in draft form. The contents, including any opinions, conclusions or recommendations contained in, or which may be implied from, this draft document must not be relied upon. GHD reserves the right, at any time, without notice, to modify or retract any part or all of the draft document. To the maximum extent permitted by law, GHD disclaims any responsibility or liability arising from or in connection with this draft document. New Mexico Environment Department Ground Water Quality Bureau Notice of Intent to Discharge For Department use Only: Agency Interest Number________ PRD Assigned ________ 1. Name and mailing address of person proposing to discharge (Responsible Person): _________________________________________ Becky Hesslen Work Phone: _______________________ 918-977-4511 _________________________________________ Phillips 66 Remediation Management Cell/Home Phone:___________________ 918-914-3846 _________________________________________ 420 S. Keeler Avenue, 1708-01 Fax:_______________________________ 918-977-8157 _________________________________________ Bartlesville, Oklahoma 74003 Email:_____________________________ Becky.L.Hesslen@p66.com 2. Name and Position of person Completing Form: _________________________________________ David Bonga Work Phone: _______________________ 720 974-0951 _________________________________________ GHD Services, Inc Cell/Home Phone:___________________ 616-821-1012 _________________________________________ 14998 West 6th Avenue, Suite #800 Fax:_______________________________ 720-974-0936 _________________________________________ Golden, Colorado 80401 Email:_____________________________ David.Bonga@ghd.com 3. Name of facility: __________________________________________________________________________________________ Phillips 66 East Hobbs Junction 4. Physical location of the discharge (if applicable, give street address, township, range, section, distance from closest town or landmark, directions to facility, location map): ____________________________________________________________________________________________ 32°40'52.83"N 103° 9'55.27"W ____________________________________________________________________________________________ Hobbs, New Mexico ____________________________________________________________________________________________ 5. Type of operation generating the discharge (e.g., agricultural facility, domestic wastewater discharge, industrial discharge, mining operation, etc.): ____________________________________________________________________________________________ Environmental groundwater remediation 6. Source(s) of the discharge. Describe how the wastewater, sludge, or other discharges processed and/or disposed at your facility are generated. Identify all sources. Attach additional pages if needed: ____________________________________________________________________________________________ Discharge solution will be batch mixed on site and then pumped under pressure into the ____________________________________________________________________________________________ groundwater below the site via two and four inch monitoring and injection wells. There are nine ____________________________________________________________________________________________ injection wells, and three monitoring wells. 7. Expected contaminants in the discharge (e.g., nitrate-nitrogen, metals, organic compounds, salts, etc.) Include estimated concentration if known, and copies of results of laboratory analyses, if available: Approximately 6,500 gallons of Cool-Ox® will be injected. The safety data sheets are attached. _____________________________________________________________________________________________ June 30, 2016 Page 2 of 2 Ground Water Quality Bureau Notice of Intent New Mexico Environment Department Ground Water Quality Bureau Notice of Intent to Discharge For Department use Only: Agency Interest Number________ PRD Assigned ________ 8. Describe all components of wastewater processing, treatment, storage, and disposal system (e.g., pre- treatment units, impoundments(s), septic tank/leachfield, etc.). Include sizes, site layout map, plans, and specifications, etc. if available: ____________________________________________________________________________________________ Not Applicable ____________________________________________________________________________________________ 9. Estimated maximum daily discharge volume in gallons per day. Provide water usage records or system sizing criteria if available: ____________________________________________________________________________________________ 3,500 gallons maximum per day. 7 days of injections are planned over an 8 day period. 10. Estimated depth to ground water (ft):________ Source of information_____________________________ 30 GHD's Interface Probe 11. Current Total Dissolved Solids Concentration in Groundwater___________________________________ 1,000 to 3,000 mg/L Signature: ________________________________________________ Date: ___________________________ Printed name: _____________________________________________ Title: ____________________________ Certification by Responsible Person I, ________________________________________________, hereby certify that the information and data submitted in this application are true and accurate as possible, to the best of my knowledge and professional expertise and experience. Signed this _____ day of _____________, _____, upon my oath or affirmation, before a notary of the State of _________________________________ Please return this form to: NMED Ground Water Quality Bureau Telephone: 505-827-2900 P.O. Box 5469 Fax: 505-827-2965 Santa Fe, New Mexico 87502-5469 June 30, 2016 Page 2 of 2 Ground Water Quality Bureau Notice of Intent ghd.com The Power of Commitment GHD | Phillips 66 Company | 11226568 | Cool-Ox® Work Plan 2022 12 This document is in draft form. The contents, including any opinions, conclusions or recommendations contained in, or which may be implied from, this draft document must not be relied upon. GHD reserves the right, at any time, without notice, to modify or retract any part or all of the draft document. To the maximum extent permitted by law, GHD disclaims any responsibility or liability arising from or in connection with this draft document. District I 1625 N. French Dr., Hobbs, NM 88240 State of New Mexico Phone:(575) 393­6161 Fax:(575) 393­0720 District II Energy, Minerals and Natural Resources 811 S. First St., Artesia, NM 88210 Phone:(575) 748­1283 Fax:(575) 748­9720 Oil Conservation Division District III 1000 Rio Brazos Rd., Aztec, NM 87410 Phone:(505) 334­6178 Fax:(505) 334­6170 1220 S. St Francis Dr. District IV 1220 S. St Francis Dr., Santa Fe, NM 87505 Santa Fe, NM 87505 Phone:(505) 476­3470 Fax:(505) 476­3462 CONDITIONS Operator: PHILLIPS PETROLEUM CO 4001 Penbrook Odessa, TX 79762 CONDITIONS Created By Condition bbillings Work plan as submitted is APPROVED. Please proceed. OGRID: 17643 Action Number: 147458 Action Type: [UF­GWA] Ground Water Abatement (GROUND WATER ABATEMENT) Condition Date 9/30/2022

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.