O D Red Coated Squares and Rectangles (Hot Rolled Steel)

Hazard statements (CLP)

H315, H317, H318, H412

Code

Statements

H315

Causes skin irritation

2.1 Classification of the substance or mixture

Causes skin irritation, Category 2, H315 May cause an allergic skin reaction, Category 1, H317 Causes serious eye damage, Category 1, H318 Harmful to aquatic life with long lasting effects, Category 3 H412

Signal word

Danger

Hazard statements

H315 Causes skin irritation H317 May cause an allergic skin reaction H318 Causes serious eye damage H412 Harmful to aquatic life with long lasting effects

Prevention

P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P264 Wash hands/skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection.

Response

P302+P352 IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER or doctor/physician. P321 Specific treatment (see supplemental first aid instructions on this label) P332+P313 IF SKIN irritation occurs: Get medical advice/attention. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P362 Take off contaminated clothing and wash before reuse. P363 Wash contaminated clothing before reuse. 8 Section 2 Continued

Disposal

P501 Dispose of contents/container to an approved waste disposal plant. GENERAL HEALTH EFFECTS: Irritant to skin, eyes and respiratory tract. Effects may be delayed for several hours. Considerations Dispose of this product in accordance with all applicable laws and regulations. 11 Section 14: Transportation Information Transport this product in accordance with all applicable laws and regulations. This product, as supplied, is not regulated nor classified as a hazardous material/dangerous good by United States Department of Transportation (DOT), the International Civil Aviation Organization (ICAO), the International Maritime Organization (IMO), the Canadian Transportation of Dangerous Goods Act (TDG), or the International Air Transport Association (IATA). Section 15: Regulatory Information This Safety Data Sheet has been formatted to the best of our ability in accordance with American National Standards Institute (ANSI), European Communities (EC), and contains hazard criteria and all information required by the Canadian Controlled Products Regulation (CPR) in regard to this product. INTERNATIONAL REGULATIONS Canadian Inventory Status: All components of this product are currently listed on the Canadian Domestic Substance List (DSL) or the Canadian Non-Domestic Substance List NDSL. European Inventory Status: All components of this product are listed on the European Inventory of Existing Commercial Substances (EINICS) or the European List of Notified Chemical Substances (ELINCS). This product is classified and labeled in accordance with EC directives. U.S. FEDERAL REGULATIONS California Proposition 65 Right-To-Know (RTK): This product does not knowingly contain substance (s) known to the state of California to cause cancer and/or reproductive toxicity. Clean Air Act- Hazardous Air Pollutants (HAP): This product and its components do not contain any Hazardous Air Pollutants. Clean Air Act – Ozone Depleting Substances (ODS): This product and its components do not contain Ozone Depleting Substances. Clean Water Act – Priority Pollutants (PP): This product and its components do not contain Priority Pollutants. Coalition of Northeastern Governors (CONEG): This product meets the requirements of CONEG pertaining to heavy metals total content of no more than 100 PPM. No heavy metals are added as a part of the formulation, but raw materials may contain residual parts per million as naturally occurring elements. Food and Drug Administration (FDA) Food Packaging Status: This product has not been cleared by the FDA for use in food packaging and/or other applications as an indirect food additive. Occupational Safety and Health Act (OSHA): Refer to Section 11 for OSHA hazardous classification of components. Resource Conservation and Recovery Act (RCRA): This product is not regulated as a hazardous substance under 40 CFR 261. SARA Title III Section 302 – Extremely Hazardous Substances (EHS): This product is not regulated as an EHS. SARA Title III Section 304 – CERCLA: This product is not regulated for emergency release notification. 12 Section 15 Continued SARA Title III Section 311/312 – Hazard Communication Standard (HCS): Some components of this product are classified under SARA Title III Section 311/312 as an immediate (acute) hazard and a reactive hazard. SARA Title III Section 313 – Toxic Chemical List (TCL): This product and its components are not listed under the Toxic Chemical Release Reporting requirements. Toxic Substances Control Act (TSCA) Section 5(e): This product is not regulated under the Consent Order/Significant New Use Rule. Toxic Substances Control Act (TSCA) Section 8(b) – Inventory Status: All chemicals in this product are TSCA listed or excluded from listing, on the United States Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory.

Medical Conditions Generally Aggravated by Exposure

No data available. Repeated and prolonged overexposure may increase the potential for adverse health effects. Section 3: Ingredients COMMON NAME CHEMICAL PERCENT BY CAS# EXPOSURE EINECS# NAME WEIGHT LIMITS Acrylated Monomers Trade Secret Not established Trade Secret Acrylated Oligomer Trade Secret Not established Trade Secret Section 4: First Aid Measures SKIN CONTACT: Remove and isolate contaminated clothing and shoes. Remove excess material from skin with clean cloth. Flush skin with running lukewarm water. Wash affected areas using mild soap. EYE CONTACT: Flush the eye and under lids with warm water for 15 minutes. Remove any contact lenses during the flushing. Get immediate medical attention if symptoms persist. INHALATION: Move subject to fresh air and keep warm. If subject is not breathing, administer artificial respiration. If breathing is difficult, have qualified personnel administer oxygen and get medical attention. INGESTION: If appreciable quantities are swallowed, seek immediate medical attention. Section 5: Fire Fighting Measures FLASHPOINT: Not tested, expected to be >200° F (> 93.3°C) based on evaluation of constituent materials. XI - IRRITANT N – DANGEROUS TO THE ENVIRONMENT FLAMMABLE/EXPLOSIVE LIMITS (Volume % in air): Not established EXTINGUISHING METHOD: Water fog, carbon dioxide (CO2) or dry chemical AUTO-IGNITION TEMPERATURE: Not established Evacuate area of all non-emergency personnel. Fire fighters must wear full emergency equipment with self-contained breathing apparatus. At elevated temperatures hazardous polymerization may occur causing container rupture and in extreme cases, explosion. Fight fires from upwind and cool intact containers with water spray or stream at maximum range. 9 Section 6: Accidental Release Measures Remove all sources of ignition and ventilate area. Avoid skin and eye contact. Use respiratory protection. Absorb with inert materials such as dry clay or sand and place in closed container for disposal as solid waste in accordance with all applicable regulations. Environmental Precautions: Do not empty into drains. Do not discharge into drains/surface waters/groundwater. Section 7: Handling And Storage HANDLING: Avoid any unnecessary contact. Use protective clothing specified in Section 8.

Storage

Store away from heat and sunlight to prevent polymerization. Polymerization initiators include peroxides, strong oxidizers, aluminum, copper, copper alloys, carbon steel, iron, rust, and strong bases. Section 8: Exposure Controls / Personal Protection HAND PROTECTION: Use nitrile, butyl, neoprene or other gloves that are resistant to chemicals in Section 2. Replace immediately if punctured or torn or when a change of appearance (color, elasticity, shape) occurs. RadTech recommends a minimum of 0.45mm thick, nitrile gloves for long duration exposure (up to 4 hours on most UV/EB-curing acrylates) or mechanical handling activities. Single use, disposable nitrile gloves are recommended by RadTech for short duration exposures not exceeding 30 minutes, in situations where only splashes are likely. EYE PROTECTION: Use splash-proof safety goggles, safety glasses, or face shields that are ANSI approved to prevent eye contact. Eyewash availability is also recommended. SKIN PROTECTION: Protective or disposable outer clothing is recommended. Protective clothing must be cleaned thoroughly after each use. RESPIRATORY PROTECTION: Use local exhaust to control vapors and mists. Use of NIOSH approved respirators for organic vapors, is recommended where TLV is exceeded. Section 9: Physical And Chemical Properties APPEARANCE, PHYSICAL STATE AND ODOR: Red Viscous Liquid, mild odor Viscosity: 100-300 cps @25 C Density: 9.0-9.5 Lbs/Gallon BOILING POINT (°F): Not available FREEZING POINT: Not available SPECIFIC GRAVITY: 1.07 EVAPORATION RATE: <1 VAPOR PRESSURE (mm Hg): <0.1 mm Hg VAPOR DENSITY: Not established SOLUBILITY IN WATER: Practically insoluble VOC: < 0 grams/liter pH: Not available Section 10: Reactivity / Stability Hazard Data STABILITY: This material is stable under recommended storage and handling conditions. Refer to section 7. CONDITIONS TO AVOID: Excessive heat, ignition sources, exposure to sunlight and contamination with dirt and other foreign materials. SUBSTANCES TO BE AVOIDED: Polymerization initiators including peroxides, strong oxidizing agents, copper, copper alloys, carbon steel, iron, rust and strong bases INCOMPATIBILITY: No data available 10 Section 10 Continued HAZARDOUS DECOMPOSITION PRODUCTS: Thermal oxidation or pyrolysis (as in fire) may yield carbon dioxide, carbon monoxide and volatile organic fragments which are flammable, irritating or toxic. HAZARDOUS POLYMERIZATION: Under certain conditions (excess temperatures and contamination) hazardous polymerization may occur. Avoid high temperature and contamination with foreign materials.

TOXICOLOGICAL INFORMATION

TOXICOLOGICAL DATA: Slightly toxic by ingestion. Prolonged or repeated exposure may result in sensitization. LD50 – Not determined LC50 – Not determined REPRODUCTIVE TOXICITY Not determined

Teratogenic Effects

Not determined MUTAGENICITY Not determined CARCINOGENICITY: IARC? No NTP? No OSHA? No Components: Data from available scientific literature on the components of this material which have been identified as hazardous chemicals under the criteria of the OSHA Hazard Communications Standard (29 CFR 1910.1200) or the Canadian Hazardous Act are discussed below: Acute oral toxicity No data available Acute inhalation toxicity No data available Acute dermal toxicity No data available Skin corrosion/irritation No data available Serious eye damage/ No data available Eye irritation Respiratory or skin No data available sensitisation Target Organ Systemic No data available Toxicant – Repeated exposure Skin corrosion/irritation No data available

ECOLOGICAL INFORMATION

No determination has been made on ecological impact. However, it is highly recommended to prevent contamination of the environment with this product, i.e. soil, landfills, drains, sewers, surface waters, etc.