General Information
Revision date
2021-03-02
Product name
SEALOCK ADHESIVE
Emergency telephone
+44 (0) 1264 358185, +44 (0) 1264 332203
Icons in SDS
Company Information
company name
Sealock Ltd,
e-mail address of the competent person responsible for the Safety Data Sheet
sales@sealock.co.uk
Section 2
SECTION 2: Hazards identification
Classification According to Directive 67/548/EEC or 1999/45/EC: This adhesive consists mainly of high polymers. Provided it is handled with care and as long as good standards of industrial and personal hygiene are practised, it should not present any undue hazard.
EU Classification
Regulation 1272/2008/EC (CLP labelling) - This product is not a hazardous substance or preparation. This product does not have to be labelled according to GHS Criteria. Directive 67/548/EWG or 1999/45/EC - This product is not a hazardous substance or preparation. The following health hazards have however been identified: 2.1 Inhalation: Fumes should not be inhaled. Use in well ventilated area. 2.2 Ingestion: This adhesive should not be ingested. If ingestion occurs seek medical advice. 2.3 Skin Contact: There is no hazard when cold. Molten adhesive must not be allowed to come into contact with the skin. Use gloves when loading hot melt into tanks. 2.4 Eye Contact: There is no hazard when cold. Molten adhesive can cause serious eye injury. Wearing of suitable eye protection is recommended when working with molten adhesives. 3) CHEMICAL CONSTITUENTS: Main Constituents: Mixture of Synthetic Polymers Wax and Resin.
