General Information
Revision date
2008-01-28
Product name
Hot Melt Adhesiv H1'153
Icons in SDS
Company Information
company name
Sealock Ltd
Section 2
SECTION 2: Hazards identification
This adhesive consists mainly of high polymers, waxes and resins. Provlded it is handled with care and as long as good standards of industrial and personal hygiene are practised, it should not present any undue hazard. The following health hazards have however been identified: 2.1 lnhalation: Fumes should not be inhaled. Use in well ventilated area. 2.2 Ingestion: This adhesive is supplied in small slats. lt should not be ingested. lf ingestion occurs seek medical advice. 2.3 Skin Contact: There is no hazard when cold. Molten adhesive must not be allowed to come into contact with the skin. Use gloves when loading hot melt into tanks. 2.4 Eye Contact: There is no hazard when cold. Molten adhesive can cause serious eye injury. Wearing of goggles is recommended when working with molten adhesive 3I CHEMICAL CONSTITUENTS: Main constituents: Thermoplastic Rubber ResinBlend Plasticiser
