Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
60-100
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
30-60
General Information
Revision date
2018-03-23
Product name
INSTAPAK COMPONENT "A"
1.2.1 Relevant identified uses
Component used for producing Instapak® polyurethane foam
Emergency telephone
61 3 9358 2244, 61 3 9359 0212, 61 2 9037 2994
Icons in SDS
Company Information
company name
Sealed Air Pty Ltd
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture H332 Acute Toxicity: Inhalation Category 4 H315 Skin Corrosion/Irritation Category 2 H319 Serious Eye Damage/ Eye Irritation Category 2B H334 Respiratory Sensitization Category 1 H317 Skin Sensitization Category 1 H335 Specific Target Organ Toxicity (Single Exposure) [Respiratory Tract Category 3 Irritation] 1=Highest severity 2=High severity 3=Low severity 4=Lowest severity
Signal word
Danger Hazard Statements H332 - Harmful if inhaled H319 - Causes skin and eye irritation H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled H317 - May cause an allergic skin reaction H335 - May cause respiratory irritation
Prevention
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust/ fume/ gas/ mist/ vapors/ spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing must not be allowed out of the workplace. P280 Wear eye protection/ face protection. P280 Wear protective gloves. P281 Use personal protective equipment as required. P285 In case of inadequate ventilation wear respiratory protection.
Response
P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P304 + P340 + P312 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/ physician if you feel unwell. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned: Get medical advice/ attention. P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention. P337 + P313 If eye irritation persists: Get medical advice/ attention. P362 Take off contaminated clothing and wash before reuse.
Storage
P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Disposal
P501 Dispose of contents/ container to an approved waste disposal plant. Health hazards not otherwise classified (HHNOC) - Not applicable Physical hazards not otherwise classified (PHNOC) - Not applicable
2.1 Classification of the substance or mixture
H332 Acute Toxicity: Inhalation Category 4 H315 Skin Corrosion/Irritation Category 2 H319 Serious Eye Damage/ Eye Irritation Category 2B H334 Respiratory Sensitization Category 1 H317 Skin Sensitization Category 1 H335 Specific Target Organ Toxicity (Single Exposure) [Respiratory Tract Category 3 Irritation] 1=Highest severity 2=High severity 3=Low severity 4=Lowest severity Signal Word: Danger Hazard Statements: H332 - Harmful if inhaled. H319 - Causes skin and eye irritation. H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 - May cause an allergic skin reaction. H335 - May cause respiratory irritation.