Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
60-100
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
30-60
General Information
Revision date
2019-11-01
Product name
INSTAPAK QUICK RT COMPONENT "A"
1.2.1 Relevant identified uses
Component used for producing Instapak® polyurethane foam
supplier name
10 Old Sherman Turnpike
Emergency telephone
800-424-9300
Icons in SDS
Company Information
company name
Sealed Air Corporation (US)
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture Acute Toxicity: Inhalation Category 4 Skin Corrosion/Irritation Category 2 Serious Eye Damage/ Eye Irritation Category 2B Respiratory Sensitization Category 1 Skin Sensitization Category 1 Specific Target Organ Toxicity (Single Category 3 Exposure) [Respiratory Tract Irritation] 1=Highest severity 2=High severity 3=Low severity 4=Lowest severity
Signal word
Danger Hazard Statements Harmful if inhaled Causes skin and eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction May cause respiratory irritation
Precautionary statements
Wear chemical resistant butyl rubber, nitrile rubber, neoprene, or other suitable protective gloves. Wear eye or face protection. In case of inadequate ventilation wear respiratory protection. Use only outdoors or in a well-ventilated area. Avoid breathing vapor. Wash hands thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. If experiencing respiratory symptoms: Call a POISON CENTER or physician. IF ON SKIN: Wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse. If skin irritation or rash occurs Get medical attention. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. Dispose of contents and container in accordance with all local, regional, national and international regulations. Health hazards not otherwise classified (HHNOC) - Not applicable Physical hazards not otherwise classified (PHNOC) - Not applicable
2.1 Classification of the substance or mixture
Acute Toxicity: Inhalation Category 4 Skin Corrosion/Irritation Category 2 Serious Eye Damage/ Eye Irritation Category 2B Respiratory Sensitization Category 1 Skin Sensitization Category 1 Specific Target Organ Toxicity (Single Category 3 Exposure) [Respiratory Tract Irritation] 1=Highest severity 2=High severity 3=Low severity 4=Lowest severity Signal Word: Danger Hazard Statements: Harmful if inhaled. Causes skin and eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. May cause respiratory irritation.