Note: Ingredients listed on restricted chemical lists
EC/CAS
231-153-3
Name of the chemical
Carbon black
Concentration
308063- 67-4 20-80% 7440-44- 25212- 80-20% 74-2
General Information
Revision date
2014-11-19
Product name
TPFL carbon/pps yarns or textures
1.2.1 Relevant identified uses
This material consists of carbon and polyphenylene sulfide (PPS) blended fibers that are spun in yarns or tapes that are ultimately converted in textures (braids, woven or multiaxialed fabrics) to be used in the manufacture of composite parts. The fiber lengths measured in the beam range from 35 mm to 200 mm, the diameter of the fibers is equal to 7 microns
Icons in SDS
Company Information
company name
Schappe Techniques
e-mail address of the competent person responsible for the Safety Data Sheet
salesrd@schappe.com
Section 2
2.1 Classification of the substance or mixture
Accordance with Directives 67/548/EEC, 1999/45/EC and their amendments. This mixture has no physical danger. Refer to the recommendations regarding the other products present on the site. This mixture does not present a health hazard. This mixture does not present a danger to the environment. No damage to the environment are not known or expected under normal use. If the temperature exceeds 450 degrees C, fumes irritating to the eyes, nose, and throat will be evolved. If exposed to these fumes, the eyes will tear, itch, and turn red. The nose will burn. The throat will burn and coughing may result.
2.2 Label elements
Commercial product used as fibers, fabrics or as a reinforcement in the manufacture of composite parts. Accordance with Directives 67/548/EEC, 1999/45/EC and their amendments. Do not use for any purpose other than that for which it is intended.
2.3 Other hazards
None
