Note: Ingredients listed on restricted chemical lists
EC/CAS
128-39-2
Name of the chemical
Phenol, 2,6-bis(1,1-dimethylethyl)
Concentration
60-100 0.1-1
EC/CAS
64742-01-4
Name of the chemical
Residual oils (petroleum), solvent-refined; Base oil — unspecified (A complex combination of hydrocarbons obtained as the solvent insoluble fraction from solvent refining of a residuum using a polar organic solvent such as phenol or furfural. It consists of hydrocarbons having carbon numbers predominantly greater than C25 and boiling above approximately 400 °C.)
Concentration
N/A
EC/CAS
64742-52-5
Name of the chemical
Distillates (petroleum), hydrotreated heavy naphthenic; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of at least 19 10-6 m2.s-1 at 40 °C. It contains relatively few normal paraffins.)
Concentration
N/A
EC/CAS
64742-57-0
Name of the chemical
Residual oils (petroleum), hydrotreated
Concentration
N/A
EC/CAS
64742-62-7
Name of the chemical
Residual oils (petroleum), solvent-dewaxed
Concentration
N/A
EC/CAS
64742-65-0
Name of the chemical
Distillates (petroleum), solvent-dewaxed heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by removal of normal paraffins from a petroleum fraction by solvent crystallisation. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of not less than 19 10-6 m2.s-1 at 40 °C.)
Concentration
N/A
EC/CAS
72623-85-9
Name of the chemical
Lubricating oils (petroleum), C20-50, hydrotreated neutral oil-based, high-viscosity
Concentration
N/A
EC/CAS
72623-87-1
Name of the chemical
Lubricating oils (petroleum), C20-50, hydrotreated neutral oil-based; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating light vacuum gas oil, heavy vacuum gas oil and solvent deasphalted residual oil with hydrogen in the presence of a catalyst in a two stage process with dewaxing being carried out between the two stages. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of approximately 32 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
N/A
General Information
Revision date
2015-04-15
Product name
160 Moly Slide and Way Lube ISO 32, 46, 68, 100, 150, and 220
1.2.1 Relevant identified uses
Slide and way lube oil
supplier name
Schaeffer Mfg. Company
Emergency telephone
+1 314 865-4105
Icons in SDS
Company Information
company name
Schaeffer Mfg. Company
e-mail address of the competent person responsible for the Safety Data Sheet
safety@schaefferoil.com
GHS Information
Signal word
No signal word
Section 2
SECTION 2: Hazards identification
Signal word
No signal word.
Hazard statements
No known significant effects or critical hazards.
Prevention
Not applicable.
Response
Not applicable.
Storage
Not applicable.
Disposal
Not applicable.
2.3 Other hazards
None known.
2.1 Classification of the substance or mixture
Not classified. substance or mixture