Note: Ingredients listed on restricted chemical lists
EC/CAS
102-60-3
Name of the chemical
N,N,N′,N′-tetrakis(2-hydroxypropyl)ethylenediamine
Concentration
N/A
EC/CAS
91-20-3
Name of the chemical
Naphthalene,3
Concentration
N/A
General Information
Revision date
2017-05-26
Product name
SASE Flo-Mender 2 “B”
1.2.1 Relevant identified uses
Polyurethane component industrial chemicals Suitable for use in industrial sector: Polymers industry; chemical industry
Icons in SDS
Company Information
company name
SASE Company Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H227, H302, H304, H317, H320, H336, H351
Hazard statements
Code
Statements
H227
Combustible liquid
Section 2
SECTION 2: Hazards identification
According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200 According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200
Aspiration hazard
1 Respiratory or skin sensitization 1 (Skin) Respiratory or skin sensitization Carc. 2 Carcinogenicity Eye Dam./Irrit. 2B Serious Eye Damage/Eye Irritation STOTSE 3 Specific target organ toxicity - Single exposure Flammable Liquids 4 Flammable Liquids Acute Tox. 4 (Oral) Acute toxicity
Signal word
DANGER
Hazard statements
H304 May be fatal if swallowed and enters airways H317 May cause an allergic skin reaction H351 Suspected of causing cancer H320 Causes eye irritation H336 May cause drowsiness or dizziness H227 Combustible liquid H302 Harmful if swallowed
Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames. P273 Avoid release to the environment. P280 Wear protective gloves. P281 Use personal protective equipment as required.
Response
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage
P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Precautionary statements
Disposal) P501 Dispose of contents/ container to an approved waste disposal plant.
Principle Routes of Exposure
Eyes; Ingestion; Inhalation; Skin; Target Organs: Eyes; Skin; Respiratory system; Inhalation: Heating, spraying, foaming or otherwise mechanically dispersing operations way generate vapor or aerosol concentrations sufficient to cause irritation or other adverse effects. Minimal respiratory tract irritation may occur with exposure to a large amount of material. Skin Contact: Prolonged or repeated exposure can cause skin irritation or dermatitis in some individuals. Eye Contact: May cause watering of the eye and irritation of the conjunctiva.
