Note: Ingredients listed on restricted chemical lists
EC/CAS
231-111-4/7440-02-0
Name of the chemical
Nickel
Concentration
0.1-99.0
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
0.1-34.0
EC/CAS
231-157-5/7440-47-3
Name of the chemical
Chromium‡
Concentration
10.0-
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
0.1-3.5
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
0.1-3.0
EC/CAS
231-158-0/7440-48-4
Name of the chemical
Cobalt, Metall (2020/217)
Concentration
0.0-2.5
EC/CAS
231-100-4/7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
0.0-2.5
Listed in
EC/CAS
231-176-9/7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
0.01-
EC/CAS
231-957-4/7782-49-2
Name of the chemical
Selenium
Concentration
0.01-
EC/CAS
231-768-7/7723-14-0
Name of the chemical
Phosphorus
Concentration
0.015-
EC/CAS
231-722-6/7704-34-9
Name of the chemical
sulphur
Concentration
0.001-
EC/CAS
231-141-8/7440-31-5
Name of the chemical
Organometallic tin
Concentration
<0.01
EC/CAS
231-175-3/7440-66-6
Name of the chemical
Zinc ()
Concentration
<0.01
EC/CAS
231-150-7/7440-41-7
Name of the chemical
Beryllium
Concentration
N/A
General Information
Revision date
2018-03-23
Product name
STAINLESS STEEL & NICKEL ALLOYS
Chemical name
Metal Alloys
Icons in SDS
Company Information
company name
SALEM TUBE, INC
e-mail address of the competent person responsible for the Safety Data Sheet
salemquality@salemtube.com
Section 2
SECTION 2: Hazards identification
These products are “Articles” under regulations and standard for the countries listed above. Refer to Section 15 (Regulatory Information) for specific regulatory citations. As articles, these products present negligible health and physical hazards under reasonably anticipated circumstances of use. Subsequently, a Safety Data Sheet is not required for these products under Standards cited above. This document is prepared to provide persons using these products with additional safety information. GLOBAL HARMONIZATION LABELING AND CLASSIFICATION: These products are articles and are not required to be classified under all jurisdictions. EMERGENCY OVERVIEW
Product definition
These products are solid metal alloys.
Health hazards
During normal use and handling, these products present minimal health hazards. When these alloys are cut or formed, inhalation of dusts may cause irritation of the respiratory system. If heated, fumes may cause metal fume fever. Some components are toxic in dust form; dusts from these products can present a toxicity hazard. Contact with dusts or metal particles may cause mechanical irritation of the eyes. Sharp edges can cause cuts. Components of these alloys are known or suspected carcinogens. The Lead component is a known reproductive toxin. Due to the high level of Nickel, the alloy presents a hazard of skin sensitization and allergic skin reactions in persons susceptible to Nickel. Other components are also skin and/or respiratory sensitizers. Flammability Hazards: These alloys are not flammable. Reactivity These alloys are not reactive.
Environmental hazards
Although these alloys present negligible adverse effects to the some components are known to be toxic to marine organisms. Emergency Recommendations Emergency responders must wear the personal protective equipment suitable for the situation to which they are responding.