weber.therm EPS

SECTION 2: Hazards identification

May cause transient mechanical irritation to skin. High dust levels may irritate the throat and eyes.

EC Classification

NONE (referring to fibres from the product) Xi

R-phrase(s)

38 3. COMPOSITION Inert vitreous mineral wool bonded with a small amount of thermosetting phenolic resin that has been urea extended. 4. FIRST AID MEASURES SKIN CONTACT: After contact with skin, wash immediately with plenty of water and then follow with washing with soap and water. EYE CONTACT: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 5. FIRE-FIGHTING MEASURES The material is non-combustible and does not pose a fire hazard. However, some facings and packaging may burn. weber.therm Weber.therm MFS & MFL_MSDS 1 Suitable extinguishing material: water, foam, Carbon dioxide or dry powder Products of combustion: Carbon dioxide, carbon monoxide and some trace gases 6. ACCIDENTAL RELEASE MEASURES Personal Precautions When working with or cutting this material dust may be created, a dust mask, gloves and suitable protective clothing are recommended. (For further details see sections 7 & 8) 7. HANDLING AND STORAGE Handling When working with or cutting material dust may be created - dust mask, gloves and suitable protective clothing are recommended. When handling MFL & MFS, due regard should be paid to Manual Handling Operations Regulations 1992. A package containing this product may exceed the recommended weight stated in the current Manual Handling Regulations. The regulations should be consulted for guidance as to the appropriate lifting methods. None R 38: Irritating to skin 36/38 4. FIRST AID MEASURES SKIN CONTACT: After contact with skin, wash immediately with plenty of soap and water. EYE CONTACT: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 5. FIRE-FIGHTING MEASURES The material has relatively low flammability and is not easily ignitable. It is highly unlikely that phenolic foams will contribute to the initial stages of a fire. On exposure to a high temperature fire source the material will carbonise slowly without flaming. Combustion products are: carbon monoxide, carbon dioxide and water vapour. Suitable extinguishers: Carbon monoxide, dry powder, vaporising liquid or water spray. Avoid breathing combustion products. weber.therm PHS Jan 09 1 6. ACCIDENTAL RELEASE MEASURES Personal Precautions When working with or cutting this material dust may be created, a dust mask, gloves and suitable protective clothing are recommended. 7. HANDLING AND STORAGE Handling When handling Phenolic Insulant, due regard should be paid to Manual Handling Operations Regulations. A package containing this product may exceed the recommended weight stated in the current Manual Handling Regulations. The regulations should be consulted for guidance as to the appropriate lifting methods. R36/38: Harmful to eyes and skin

Storage

Avoid unnecessary handling of unwrapped product. Store in a dry place in original packaging if appropriate. Packaging materials should not be exposed to a heat source. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Technical Protective Measures Maximum exposure limit (WEL): 5mg/m3 (8 hour TWA) Ensure good general ventilation. Local exhaust ventilation may be required if the method of use produces dust levels in excess of the MEL Respiratory Protection Suitable respiratory protection should be worn to ensure that handlers are not subjected to dust from the material. If the WEL is likely to be exceeded, disposable face masks complying with EN149, FFP1 or FFP2 should be used and are suitable for most applications. Hand Protection Wear suitable gloves. Eye Protection Suitable goggles or face protection should be worn wherever there is a risk of product entering the eye. Skin Protection Wear overalls and closed footwear. weber.therm Weber.therm MFS & MFL_MSDS 2 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Brown, vitreous mineral wool slab or lamella Melting point: above 1000oC Solubility: Insoluble in water and generally inert 10. STABILITY AND REACTIVITY Stable under normal room temperature and storage conditions. No special physical conditions need to be avoided. No health & safety restrictions regarding incompatible materials Store away from all sources of ignition and provide adequate space for access. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Technical Protective Measures No special measures required Respiratory Protection Suitable respiratory protection should be worn to ensure that handlers are not subjected to dust from the material. Hand Protection Wear suitable gloves. Eye Protection Suitable goggles or face protection should be worn wherever there is a risk of product entering the eye. Skin Protection Wear overalls and closed footwear. 9. PHYSICAL AND CHEMICAL PROPERTIES A rigid foamed slab containing extremely low quantities of residual phenol and formaldehyde. 10. STABILITY AND REACTIVITY Stable under normal room temperature storage conditions.

TOXICOLOGICAL INFORMATION

Human epidemiological studies show no link between exposure to mineral wool fibres and lung disease or any other chronic effects. The fibres from this produce are not classified as a carcinogen under European Commission Directive 97/69/EC Eye Contact Trace levels of phenol and formaldehyde in the product may be irritating to eyes. Skin Contact Contact with the product may cause irritation to sensitive skin. weber.therm PHS Jan 09 2

ECOLOGICAL INFORMATION

Stable product with no known adverse environmental effects 13. DISPOSAL CONSIDERATIONS Dispose of as an inert solid waste in approved landfill sites provided local regulations are observed. 14. TRANSPORT INFORMATION Classification for Transport not required. 15. REGULATORY INFORMATION Eglinton Mineral Fibre Slab Essentially non-toxic under room temperature and normal conditions. 13. DISPOSAL CONSIDERATIONS Dispose of empty pails or surplus product to place authorised to accept builder’s waste. Keep out of reach of children. Local regulations should always be observed. 14. TRANSPORT INFORMATION Classification for Transport not required. 15. REGULATORY INFORMATION

Hazard pictograms

None Xi (Irritant) Xi Irritant

S-phrase(s)

S37/38/39: Wear suitable gloves, respiratory protection and eye/face protection. S2 Keep out of reach of children. Fibres from Eglinton Mineral Fibre Slab weber.therm Weber.therm MFS & MFL_MSDS 3 S37/38/39: Wear suitable gloves, respiratory protection and eye/face protection. S28: After contact with skin, wash immediately with plenty of soap and water. S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39: Wear suitable gloves and eye/face protection. Keep out of reach of children.

Further information

None weber.therm Weber.therm MFS & MFL_MSDS 4 MATERIAL SAFETY DATA EDITION 8 Date: January 2009 1. PRODUCT NAME: weber.therm PHS Chemical Nature A phenol formaldehyde rigid foam slab Manufacturer Weber Saint-Gobain Weber Limited Dickens House Enterprise Way Flitwick Bedford. MK45 5BY. EMERGENCY TELEPHONE NUMBER. 08703 330070 Contact with the product may cause irritation to sensitive skin. 3. COMPOSITION A rigid foamed slab containing extremely low levels of residual phenol and formaldehyde EEC Symbol: Xi None